2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Mopar or Hughes Manifold?

Thread Tools
 
Search this Thread
 
  #111  
Old 01-28-2013 | 11:59 AM
RedRocket2000's Avatar
RedRocket2000
Thread Starter
|
Rookie
Joined: Sep 2012
Posts: 74
Likes: 0
Default

Ya I could probably give er a go in the summer. And if I **** up the guy I take my truck to, he's only ten minutes away. And when I graduate I would like to take an auto body course and maybe a few mechanic courses
 
  #112  
Old 01-28-2013 | 01:47 PM
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

Originally Posted by RedRocket2000
Ya I could probably give er a go in the summer. And if I **** up the guy I take my truck to, he's only ten minutes away. And when I graduate I would like to take an auto body course and maybe a few mechanic courses
its only 12 bolts, and some gaskets. its really not that hard. that is unless you snap a bolt off in the head.............
 
  #113  
Old 01-28-2013 | 05:28 PM
RedRocket2000's Avatar
RedRocket2000
Thread Starter
|
Rookie
Joined: Sep 2012
Posts: 74
Likes: 0
Default

I really was positive I could do it now that you mention snapping of a bolt in the head, really discouraged me haha. But solid point
 
  #114  
Old 01-28-2013 | 05:41 PM
Wombat Ranger's Avatar
Wombat Ranger
Grand Champion
Joined: Sep 2011
Posts: 5,672
Likes: 3
From: Wild West
Default

Originally Posted by gdstock
OR....You can go the the FAY/DIY section hre on DF and download the service manual and parts manual for FREE!! (where is my gold?)
Well, technically electronic files don't weigh anything, so I think you are out of luck.
 
  #115  
Old 01-29-2013 | 08:59 AM
lastrights's Avatar
lastrights
Grand Champion
Joined: Sep 2007
Posts: 5,849
Likes: 4
From: the burgh
Default

when i did my airgap someone was at the plenum before because there was no bolt in the back , the screw was still in the head still :/. and i broke a bolt up front . other than them bolts will snap, make sure u soak em a day lol
 
  #116  
Old 01-30-2013 | 12:57 PM
RedRocket2000's Avatar
RedRocket2000
Thread Starter
|
Rookie
Joined: Sep 2012
Posts: 74
Likes: 0
Default

I soaked my bolts on my headers like twice a day for a week all of them came out nice but the one snapped
 
  #117  
Old 01-31-2013 | 05:15 PM
Hahns5.2's Avatar
Hahns5.2
Record Breaker
Joined: Mar 2009
Posts: 2,181
Likes: 2
From: Battle Ground WA
Default

Originally Posted by Wh1t3NuKle
Roger roger.

Oh yeah Hahnz and his thumbing-his-nose-turbo.
Hey now, I saw that



The M1 is great, but it needs a good tune to take advantage of the airflow characteristic changes.


Emissions shouldn't change much, if at all.
 
  #118  
Old 02-02-2013 | 12:16 AM
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default

hahahahah!!
 
  #119  
Old 02-02-2013 | 08:54 AM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

I didn't soak even 1 single bolt in penetrating oil when I did my plenum, and not 1 single bolt broke
 
  #120  
Old 02-06-2013 | 06:18 PM
renardk764's Avatar
renardk764
Veteran
Joined: Jul 2012
Posts: 387
Likes: 1
From: Austin, Texas
Default

Found this on ebay. No funds or I'd bid my self.

http://www.ebay.com/itm/M1-performan...sories&vxp=mtr
 


Quick Reply: Mopar or Hughes Manifold?



All times are GMT -4. The time now is 09:10 AM.