When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was haulin' some hay today and noticed that the back end was "swiming" and was sitting a little low. The bales were 90-100lbs each and had a total of 12. Now once I got home I noticed that the weight wasn't distributed all that well but with only about 1200lbs I don't think the frame should be 1/2 an inch from resting on the axle, right?
Last edited by 95' 360 Ram; 09-10-2013 at 08:16 PM.
do you have a level kit installed? if so that lowers how much weight you can haul in the bed. my 81 has no issue hauling a full ton but the front end sits low and the back end sits high.