When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've seen on other forum that people have their tb's bored out by a machine shop instead of buying a fastman. Is it worth doing that option or should a guy just buy at fastman instead?
I've seen on other forum that people have their tb's bored out by a machine shop instead of buying a fastman. Is it worth doing that option or should a guy just buy at fastman instead?
See how much a local shop will charge you to do it. Probably can get it done for around 60 bucks or so.... a LOT cheaper than a fastman. You can do the top yourself with a dremel.
I already have an extra tb with the top chopped off and smoothed off for the most part. Wouldn't boring out make a gap between the wall and flapper disc tho?
If you only punch it out to 50mm, you won't need new butterflies. If you look, you will notice that the bore is 'stepped', just above the throttle plates. That bottom diameter is..... 50mm. Above I think is 48ish.