CAD drawings of ram 1500?
#11
RE: CAD drawings of ram 1500?
It is not on computer
but Chrysler did sell (probably still does)
an official Handbook
called something like:
Body Builders manual for Dodge Ram Pickups
which is a large format book
with drawings and charts on dimensions
of the Ram.
It is meant for RV companies, aftermarket pickup tool bed makers, Customizers, etc.
I have the version for the 1995 Ram
but the book is at my vacation house right now
and I can't get to it to give the exact title.
This official DCx place sells it:
https://techauthority.gltghosting.co...atalogId=10051
but Chrysler did sell (probably still does)
an official Handbook
called something like:
Body Builders manual for Dodge Ram Pickups
which is a large format book
with drawings and charts on dimensions
of the Ram.
It is meant for RV companies, aftermarket pickup tool bed makers, Customizers, etc.
I have the version for the 1995 Ram
but the book is at my vacation house right now
and I can't get to it to give the exact title.
This official DCx place sells it:
https://techauthority.gltghosting.co...atalogId=10051
#13
RE: CAD drawings of ram 1500?
I am now where i can get to my copy of the
"Dodge Truck 1995 Body Builders Guide"
On the second page it says the cost is
$25
and the address for purchasing is
Dodge Truck Merchandising
PO Box 3315
Livonia MI 48
ATTN: Dodge Truck Body Builders Guide
The first two thirds of this book are mostly electrical wiring diagrams
but the back third is engineering drawings.
I assume that have a guide for any of the model years.
"Dodge Truck 1995 Body Builders Guide"
On the second page it says the cost is
$25
and the address for purchasing is
Dodge Truck Merchandising
PO Box 3315
Livonia MI 48
ATTN: Dodge Truck Body Builders Guide
The first two thirds of this book are mostly electrical wiring diagrams
but the back third is engineering drawings.
I assume that have a guide for any of the model years.
#15
RE: CAD drawings of ram 1500?
obviousally i missed something on here lol
however if your looking for a 3D image of your truck to try graphics on head down to your local decal shop most of them have that software so you can add whatever you want and see what it looks like, if you have a buddy there he may give you a copy, there is a link on here somewhere as well that you can change variables such as lift and tire size and see what it'll look like too but that would take some searching to find, let me know if you really want it and ill see if i can find that thread
however if your looking for a 3D image of your truck to try graphics on head down to your local decal shop most of them have that software so you can add whatever you want and see what it looks like, if you have a buddy there he may give you a copy, there is a link on here somewhere as well that you can change variables such as lift and tire size and see what it'll look like too but that would take some searching to find, let me know if you really want it and ill see if i can find that thread
#16
RE: CAD drawings of ram 1500?
i operate on the autocad 04 program and i havent ran across anything relating a dodge 1500 pickup. im sure there is one out there but just a matter of research and finding it. if you can find out where it is i can do the drawing for you. or transfer it over to cad the best i can. hope this helps. just pm me and let me know. thanks
#18
#19
#20