When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
That's awesome Erik. There are a few things i would do different if I could do it all over again. One thing that I will do once I get the money is put on some aluminum heads so I can run more timing. Right now there's nect to nothing in it for timing and it still knocks. Need less to say there is more power to be had with this thing. Right now I'm using SCT for the tuning, but once HP Tuners gets dodge figured out I'm going with them. Sounds Like your going to have a healthy motor your self!
All in all I have spent about 1200 ant the machine shop. There are some things that could have been done diffrently and would have cut down on cost but hinesite is 20/20.
That's awesome man. Desk top dyno say's it should be 398hp and 517tq at the crank, I think it's less than that though. It does need more tuning work and like I have said before, I think I would be in a lot better shape with the aluminum heads. But it does run okay for now.