Tune up time
#21
Well the mopar one was on back order from summit.
But I found this mallory one on jegs and it's brass. Anyone ever use it?
http://www.jegs.com/i/Mallory/650/29509/10002/-1
But I found this mallory one on jegs and it's brass. Anyone ever use it?
http://www.jegs.com/i/Mallory/650/29509/10002/-1
Last edited by Cereal Killer; 04-02-2009 at 12:21 PM.
#22
I used the ones from the dodge dealer...
wires & coil are replaced when they are bad or you want an upgrade, cap, rotor & plugs depends on your mods, stock you could probably go 45k or more depending on the plug. I always did mine around 25~30k.
edit: and that is where I found the accell cap & rotor did not last as long as the mopar ones.
wires & coil are replaced when they are bad or you want an upgrade, cap, rotor & plugs depends on your mods, stock you could probably go 45k or more depending on the plug. I always did mine around 25~30k.
edit: and that is where I found the accell cap & rotor did not last as long as the mopar ones.
#24
Join Date: Nov 2008
Location: Malvern Pa - Canadensis Pa
Posts: 7,950
Likes: 0
Received 2 Likes
on
1 Post
I used the ones from the dodge dealer...
wires & coil are replaced when they are bad or you want an upgrade, cap, rotor & plugs depends on your mods, stock you could probably go 45k or more depending on the plug. I always did mine around 25~30k.
edit: and that is where I found the accell cap & rotor did not last as long as the mopar ones.
wires & coil are replaced when they are bad or you want an upgrade, cap, rotor & plugs depends on your mods, stock you could probably go 45k or more depending on the plug. I always did mine around 25~30k.
edit: and that is where I found the accell cap & rotor did not last as long as the mopar ones.
#25
Well the mopar one was on back order from summit.
But I found this mallory one on jegs and it's brass. Anyone ever use it?
http://www.jegs.com/i/Mallory/650/29509/10002/-1
But I found this mallory one on jegs and it's brass. Anyone ever use it?
http://www.jegs.com/i/Mallory/650/29509/10002/-1
is this the mopar cap and rotor on back order? i ask b/c the terminals are aluminum
#26