2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

exhaust advice!

Thread Tools
 
Search this Thread
 
  #1  
Old 10-05-2009, 10:06 PM
01ram15005.9l's Avatar
01ram15005.9l
01ram15005.9l is offline
Registered User
Thread Starter
Join Date: Oct 2009
Location: katy, texas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default exhaust advice!

iv got a 2001 1500 with 5.9 v8 and right now i got it straight from the cat back with 3in pipe from a 3500 but its not loud at all...idk if i can gut my cat and keep my check engine light off? or if there somthing else i can do to make it loud? idk but any advice is appreciated

thanks,
cody
 
  #2  
Old 10-05-2009, 10:11 PM
zje400ex's Avatar
zje400ex
zje400ex is offline
Captain
Join Date: Apr 2009
Location: Ohio
Posts: 521
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm not sure about the cat but i do know a high-flow cat will make it louder. Does your truck have a muffler on it or is it straight piped?
 
  #3  
Old 10-05-2009, 10:15 PM
01ram15005.9l's Avatar
01ram15005.9l
01ram15005.9l is offline
Registered User
Thread Starter
Join Date: Oct 2009
Location: katy, texas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

it is straight piped from the cat back its a stock cat with 3in pipe all the way to my tips.
 
  #4  
Old 10-05-2009, 10:36 PM
dodgeram07's Avatar
dodgeram07
dodgeram07 is offline
Champion
Join Date: Mar 2008
Location: ohio
Posts: 3,363
Likes: 0
Received 1 Like on 1 Post
Default

you can gut the cat... And if you get a code you buy a slim to make the computer think it not guted thefastman.com sells them

Also you have a01 you cut of the cat and just put a pisice of pipe were the cat was thats what I would do if I did want the cat
 
  #5  
Old 10-06-2009, 11:47 AM
01ram15005.9l's Avatar
01ram15005.9l
01ram15005.9l is offline
Registered User
Thread Starter
Join Date: Oct 2009
Location: katy, texas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

ok well i dont even know how to gut my cat unless i take it to local muffler place and pay them to do it...or is there somthing within a reasonable price range you reccomend for best sound?
 
  #6  
Old 10-06-2009, 12:18 PM
big.red.ram's Avatar
big.red.ram
big.red.ram is offline
Captain
Join Date: Sep 2009
Location: Farmland, IN
Posts: 504
Likes: 0
Received 2 Likes on 2 Posts
Default

my truck is straight piped from cat back and its really loud. i have a sliding rear window so i can hear it alot better so that may be why u dont think its loud. have someone else drive it down the road and listen to it. u might change ur mind then
 
  #7  
Old 10-06-2009, 01:05 PM
Augiedoggy's Avatar
Augiedoggy
Augiedoggy is offline
Champion
Join Date: Aug 2009
Location: Western NY,
Posts: 3,014
Received 8 Likes on 7 Posts
Default

Originally Posted by 01ram15005.9l
ok well i dont even know how to gut my cat unless i take it to local muffler place and pay them to do it...or is there somthing within a reasonable price range you reccomend for best sound?
I doubt you want to do that...its illegal in most states I believe since it renders the cat usless ands increases the pollutants it dumps into the air...(whole reason for it in the first place)
Your SMARTEST option would be to get a high flow cat and that way everything still works right and will pass emissions if ever tested....and its much louder while still retaining some of the needed backpressure for low end power.
if you remove the cat and get pulled over for a loud exhaust you may regret it.
 
  #8  
Old 10-06-2009, 02:00 PM
dodgeboy1979's Avatar
dodgeboy1979
dodgeboy1979 is offline
All Star
Join Date: Aug 2009
Location: Lloydminster Alberta Canada
Posts: 762
Likes: 0
Received 0 Likes on 0 Posts
Default

I gutted my CAT approx $50 at the muffler shop. I put in an o2 sim and had nothin but grief, took out my tranny and PCM. Wouldn't advise the o2 sim. I welded in an o2 threaded nut into my pipe and reinstalled the 02 sensor and havent got a code yet. I run a flowmaster 40 series with 2.5'' exhaust. Sounds real good but not crazy loud when you are driving down the highway for long periods of time.
 
  #9  
Old 10-06-2009, 03:35 PM
lastrights's Avatar
lastrights
lastrights is offline
Grand Champion
Join Date: Sep 2007
Location: the burgh
Posts: 5,849
Likes: 0
Received 4 Likes on 4 Posts
Default

check out youtube for vids and see what sounds you like there so many exhaust done diffrent ways
 
  #10  
Old 10-06-2009, 06:33 PM
01ram15005.9l's Avatar
01ram15005.9l
01ram15005.9l is offline
Registered User
Thread Starter
Join Date: Oct 2009
Location: katy, texas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

ok and also iv been wanting to know what would be the best thing to get performance wise that isnt to terribly expensive but worth it...iv looked at programmers, mild cams, superchargers and leanin more towards a supercharger.
 


Quick Reply: exhaust advice!



All times are GMT -4. The time now is 09:41 PM.