Pics of the engine and stuff
#1
Pics of the engine and stuff
Figured I'd show you guys how it looks.
This was still at the shop
This was the day I picked it up.
Paint prep (Sorry cell phone pics)
After painting heads before the clear coat
Heres some of my headers before and after the eastwood Hi-temp header paint (I'll let you guys know how the paint holds up) The pic might have been only after 1 coat.
The new PATC Viper Spec 2300
I need to go clean up the block some more. Tape off what I painted yesterday and spay a few coats of black on the block and oil pain.
I ordered more **** from Summit this morning as well. E fan's and relay. tranny cooler, deep tranny pan, Polished SS rear cover (DON'T BUY CHROME. I LEARNED MY LESSON ON THAT). and spark plugs
This was still at the shop
This was the day I picked it up.
Paint prep (Sorry cell phone pics)
After painting heads before the clear coat
Heres some of my headers before and after the eastwood Hi-temp header paint (I'll let you guys know how the paint holds up) The pic might have been only after 1 coat.
The new PATC Viper Spec 2300
I need to go clean up the block some more. Tape off what I painted yesterday and spay a few coats of black on the block and oil pain.
I ordered more **** from Summit this morning as well. E fan's and relay. tranny cooler, deep tranny pan, Polished SS rear cover (DON'T BUY CHROME. I LEARNED MY LESSON ON THAT). and spark plugs
Last edited by BlueBeast2; 10-14-2009 at 01:55 PM.
#3
ha ha thanks. I hope it looks even better after its all painted up. Painting once its together is kinda a pain in that *** but I'll make due. It looks so small now. Can't wait to get it back in the truck.
I dropped my dash and a pillar pod off at the body shop for paint this morning. Guy said I might not get it back till sometime next week.I was like "what? I thought you guys had a 1 day turn around here" I know the owner so I was picking on the estimate guy. Hopefully I can have everything back together in a week or 2 and be back on the road
I dropped my dash and a pillar pod off at the body shop for paint this morning. Guy said I might not get it back till sometime next week.I was like "what? I thought you guys had a 1 day turn around here" I know the owner so I was picking on the estimate guy. Hopefully I can have everything back together in a week or 2 and be back on the road
#5
may want this so your rockrs wont float and break the pushrods and stuff at high rpms
http://www.hughesengines.com/Index/p...2&partid=23368
http://www.hughesengines.com/Index/p...2&partid=23368
#7
may want this so your rockrs wont float and break the pushrods and stuff at high rpms
http://www.hughesengines.com/Index/p...2&partid=23368
http://www.hughesengines.com/Index/p...2&partid=23368
95 Don't be jealous till its in and running ha ha. Its been a while in the making.