1.7 Roller Rockers
#1
1.7 Roller Rockers
ok i am looking into the 1.7 upgrade, but have a quick couple questions
#1 is this the kind that everyone usually goes with?
http://www.summitracing.com/parts/CSP-S7307/
#2
Says shims are not included, do i need to get shims?
and im unable to acess the DIY keeps saying the link is "broken" so if anyone has the write up please share.
but looking at the Haynes, it looks pretty staright forward
#1 is this the kind that everyone usually goes with?
http://www.summitracing.com/parts/CSP-S7307/
#2
Says shims are not included, do i need to get shims?
and im unable to acess the DIY keeps saying the link is "broken" so if anyone has the write up please share.
but looking at the Haynes, it looks pretty staright forward
#2
360, go right to here... www.harlandsharp.com. Much better source for the RR's. IIRC correct Summit is selling them, so why deal with a middle man? Plus they have real good tech support,and can answer all your questions.
#4
http://www.summitracing.com/parts/CSP-S70037/ this is it 5/16 stud,,,, as far as i know no shims needed
but i would do what metal said
but i would do what metal said
#5
no shims needed its easy as cake, if you can take valve covers off and do simple bolt work, its easy as pie anyone can do it http://www.pavementsucks.com/tech-article-32.html
#6
#7
Trending Topics
#8
#9
Ummm,I might be wrong but that rebate looks like you have to send them your AFTERMARKET rocker arms to get it.Wouldnt that be counterproductive?