LD 2500 Wheel Bearings in a 1500
02-25-2010 | 07:32 PM
Joined: Oct 2009
Posts: 730
Likes: 9
From: Near Charlotte, NC
you know I used to look at them like this
5 lug- 1/2 ton
6 lug- 3/4 ton
8 lug- 1 ton
it still kinda works that way.......(kinda)
I have v10 with 60 front 70 rear, basicly the same as the 1 ton 3500
the 3500 with dualies is 60 up front 80 in the back
02-25-2010 | 07:36 PM
Joined: Jan 2010
Posts: 211
Likes: 0
From: Massachusetts
Quote:
Originally Posted by
VEETEN
you know I used to look at them like this
5 lug- 1/2 ton
6 lug- 3/4 ton
8 lug- 1 ton
it still kinda works that way.......(kinda)
I have v10 with 60 front 70 rear, basicly the same as the 1 ton 3500
the 3500 with dualies is 60 up front 80 in the back
It used to be
5 lug - 1/2 ton
8 lug - 3/4 and 1 ton
nowadays it's 6 lug - 1/2 ton and 8 3/4 and 1
02-25-2010 | 08:15 PM
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Nobody thought to mention that the 1500s have a 3-bolt flange and the 2500HDs have a 4-bolt.
Last edited by Miami_Son; 02-25-2010 at 08:23 PM .
02-25-2010 | 10:52 PM
Joined: Dec 2008
Posts: 2,032
Likes: 1
From: Elk Rapids, MI
Quote:
Originally Posted by
Miami_Son
Nobody thought to mention that the 1500s have a 3-bolt flange and the 2500HDs have a 4-bolt.
There talking about the light duty 3/4 ton bearing, which actually has a Dana 44.
02-25-2010 | 10:56 PM
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Quote:
Originally Posted by
olyelr
There talking about the light duty 3/4 ton bearing, which actually has a Dana 44.
I know. Them things are rarer than hen's teeth. Or V10s.
I see these 4-bolt units on eBay all the time, but they never differentiate between LD and HD 2500 models.
http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT
Last edited by Miami_Son; 02-26-2010 at 01:05 AM .
02-26-2010 | 11:58 PM
Joined: Jan 2010
Posts: 211
Likes: 0
From: Massachusetts
Quote:
Originally Posted by
Miami_Son
According to OP, LD was only from 94-97; being for 00-02 I would assume not.