Replacing my wheelbarring, Video inside and pic's coming tomorrow
#1
03-15-2010, 10:36 PM
Join Date: May 2006
Location: Burnsville, mn - Pensacola, fl
Posts: 3,667
Likes: 0
Received 0 Likes
on
0 Posts
Replacing my wheelbearing, Video and pic's inside
Last edited by yakkier; 03-16-2010 at 01:59 AM.
#2
03-15-2010, 10:42 PM
Record Breaker
#3
03-15-2010, 10:53 PM
Join Date: May 2006
Location: Burnsville, mn - Pensacola, fl
Posts: 3,667
Likes: 0
Received 0 Likes
on
0 Posts
****er 
spelling wasnt my strong point in school, hey are the 3 bolts for the hub reverse threaded? cause i just broke two ratchets and a 14mm wrench.
Part store is closed now so i cant go buy a 14mm socket with a 1/2 drive, which is the one i need cause my smallest breaker bar is a 1/2 drive
spelling wasnt my strong point in school, hey are the 3 bolts for the hub reverse threaded? cause i just broke two ratchets and a 14mm wrench. Part store is closed now so i cant go buy a 14mm socket with a 1/2 drive, which is the one i need cause my smallest breaker bar is a 1/2 drive
#4
03-15-2010, 10:53 PM
Record Breaker
#5
03-15-2010, 10:54 PM
Record Breaker
#6
03-15-2010, 11:00 PM
Join Date: May 2006
Location: Burnsville, mn - Pensacola, fl
Posts: 3,667
Likes: 0
Received 0 Likes
on
0 Posts
#7
03-15-2010, 11:21 PM
Legend
Join Date: Nov 2008
Location: Malvern Pa - Canadensis Pa
Posts: 7,950
Likes: 0
Received 2 Likes
on
1 Post
Trending Topics
#8
03-15-2010, 11:40 PM
Champion
#9
03-16-2010, 12:05 AM
Join Date: May 2006
Location: Burnsville, mn - Pensacola, fl
Posts: 3,667
Likes: 0
Received 0 Likes
on
0 Posts
Finally got the bolts out, ROYAL PITA.
Now im wondering what the hold up is, i got the 3 bolts out and the axle nut is off and i still cant get the ****in hub to budge. I got a flathead and a hammer and tried to hammer a gap on all the corners to bust it loose and she still aint going. Got it soaking in liquid wrench right now and gonna beat the **** out of it again in a few minutes.
Heres a couple pic's so far, Also um i dont have any retaining clips on my U joint, am i supposed to?
Now im wondering what the hold up is, i got the 3 bolts out and the axle nut is off and i still cant get the ****in hub to budge. I got a flathead and a hammer and tried to hammer a gap on all the corners to bust it loose and she still aint going. Got it soaking in liquid wrench right now and gonna beat the **** out of it again in a few minutes.
Heres a couple pic's so far, Also um i dont have any retaining clips on my U joint, am i supposed to?
Last edited by yakkier; 03-16-2010 at 12:07 AM.
#10
03-16-2010, 12:20 AM
It's amazing that your brake sheild isn't all rusty. It looks to be in decent shape compared to ones i've seen.
To get the hub out...well good luck. I had to take mine to a shop and they used a special tool to get it out. My dad and I tried for hours to get the thing off but it didnt want to budge. Some people say theirs just fall right out and others of a pita one their hands
To get the hub out...well good luck. I had to take mine to a shop and they used a special tool to get it out. My dad and I tried for hours to get the thing off but it didnt want to budge. Some people say theirs just fall right out and others of a pita one their hands