Replacing my wheelbarring, Video inside and pic's coming tomorrow
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Replacing my wheelbearing, Video and pic's inside
Last edited by yakkier; Mar 16, 2010 at 01:59 AM.
Record Breaker
Joined: Aug 2008
Posts: 1,354
Likes: 1
From: stationed in nc
well that would explain why it was pulling... lol, suprised you didnt loss brakes, usully thats what happens...
ph and for your youtube video... its bad wheel *bearings* lol... just bustin chops
ph and for your youtube video... its bad wheel *bearings* lol... just bustin chops
Last edited by meanwhitemopar; Mar 15, 2010 at 10:48 PM.
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
****er 
spelling wasnt my strong point in school, hey are the 3 bolts for the hub reverse threaded? cause i just broke two ratchets and a 14mm wrench.
Part store is closed now so i cant go buy a 14mm socket with a 1/2 drive, which is the one i need cause my smallest breaker bar is a 1/2 drive
spelling wasnt my strong point in school, hey are the 3 bolts for the hub reverse threaded? cause i just broke two ratchets and a 14mm wrench. Part store is closed now so i cant go buy a 14mm socket with a 1/2 drive, which is the one i need cause my smallest breaker bar is a 1/2 drive
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Lol yea she about yanked me off the road when she finally went, i went from the far left lane to the shoulder of the far right lane in less than a second.
those bolts are being lil ****s though, missing some skin off my right hand lol
those bolts are being lil ****s though, missing some skin off my right hand lol
Trending Topics
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Finally got the bolts out, ROYAL PITA.
Now im wondering what the hold up is, i got the 3 bolts out and the axle nut is off and i still cant get the ****in hub to budge. I got a flathead and a hammer and tried to hammer a gap on all the corners to bust it loose and she still aint going. Got it soaking in liquid wrench right now and gonna beat the **** out of it again in a few minutes.
Heres a couple pic's so far, Also um i dont have any retaining clips on my U joint, am i supposed to?
Now im wondering what the hold up is, i got the 3 bolts out and the axle nut is off and i still cant get the ****in hub to budge. I got a flathead and a hammer and tried to hammer a gap on all the corners to bust it loose and she still aint going. Got it soaking in liquid wrench right now and gonna beat the **** out of it again in a few minutes.
Heres a couple pic's so far, Also um i dont have any retaining clips on my U joint, am i supposed to?
Last edited by yakkier; Mar 16, 2010 at 12:07 AM.
Captain
Joined: Apr 2009
Posts: 521
Likes: 1
From: Ohio
It's amazing that your brake sheild isn't all rusty. It looks to be in decent shape compared to ones i've seen.
To get the hub out...well good luck. I had to take mine to a shop and they used a special tool to get it out. My dad and I tried for hours to get the thing off but it didnt want to budge. Some people say theirs just fall right out and others of a pita one their hands
To get the hub out...well good luck. I had to take mine to a shop and they used a special tool to get it out. My dad and I tried for hours to get the thing off but it didnt want to budge. Some people say theirs just fall right out and others of a pita one their hands
