Plenum Repair Materials
#1
Plenum Repair Materials
Im planning on ordering all the things I need to repair the plenum plate.
Here is everything I have and the prices. Does this sound alright or am I missing something.
Plenum KitsAPS $84
Hughes$86
Intake Gaskets and Bolts APS$55
Huges $45
180 Thermostat Hughes $12
Cap & RotorAutozone $35
Spark Plugs Duralast $25
Bosche $35
Ignition CoilAccel $63
ShippingAPS $20
CoolantAutozone $20
Injector O-rings $5
Throttle Body Gasket $5
Cold Air Intake Gasket $5
Intake Bolts$15
Is there anything else I would need, or that you guys would recommend?
Here is everything I have and the prices. Does this sound alright or am I missing something.
Plenum KitsAPS $84
Hughes$86
Intake Gaskets and Bolts APS$55
Huges $45
180 Thermostat Hughes $12
Cap & RotorAutozone $35
Spark Plugs Duralast $25
Bosche $35
Ignition CoilAccel $63
ShippingAPS $20
CoolantAutozone $20
Injector O-rings $5
Throttle Body Gasket $5
Cold Air Intake Gasket $5
Intake Bolts$15
Is there anything else I would need, or that you guys would recommend?
Last edited by Nando Vazquez; 05-24-2010 at 05:59 PM.
#3
#5
#6
i know DV did timing chain. it would be awesome to do if you know how. only a couple of bolts after doing plenum. search for timing chain, should have some pics.
just wondering why you have intake bolts listed three times? is that just for bolts and no gasket from AZ? make sure to double check on the amount of fluids you will need to finish the job i.e coolant, oil, etc.
is ignition coil by accel just the distributor assembly?
just wondering why you have intake bolts listed three times? is that just for bolts and no gasket from AZ? make sure to double check on the amount of fluids you will need to finish the job i.e coolant, oil, etc.
is ignition coil by accel just the distributor assembly?
#7
Trending Topics
#8
dont forget lock tight... my plenum kit came with new instructions to use ultra copper gasket sealer for the plenum gaskit so you need that as well.
i didnt take off my injectors or the throttle body so unless you just want new gaskits for that ok but you dont have to take them off
you might want to make sure you have a torque wrench you need to torque them 3 times 24/48/86 INCH lbs of torque... i say INCH because i snapped a bolt into the hole of my intake trying to torque them down to FOOT lbs of torque lol wasted a whole day trying to get it back out
good luck its not that hard a job.. i got mine from abs cant compare but it was a good product
i didnt take off my injectors or the throttle body so unless you just want new gaskits for that ok but you dont have to take them off
you might want to make sure you have a torque wrench you need to torque them 3 times 24/48/86 INCH lbs of torque... i say INCH because i snapped a bolt into the hole of my intake trying to torque them down to FOOT lbs of torque lol wasted a whole day trying to get it back out
good luck its not that hard a job.. i got mine from abs cant compare but it was a good product
#9
so i was about to purchase a new water pump from moparonlineparts.com but ive noticed on some parts it states "w 8.0L" or "w/o 8.0L". what is the 8.0L they are talking about? i think it is the v10 but on some parts the only option is 8.0L...just double checking before i order it.
for example: why would a termostat housing for a ram with a 8.0l be $100 but w/o a 8.0L it is $6? TIA
for example: why would a termostat housing for a ram with a 8.0l be $100 but w/o a 8.0L it is $6? TIA