Give it a shot, and see what happens.

 

that is the only code that pops up when i use the handheld to so i am hoping the is it

 

this all started when i changed the passenger side exhaust gasket i started the truck turned it off then tryed to start it again and nothing

 

Try unscrewing and cleaning the large connector in the PDC.

 

It is kinda odd...... coincidence? Who knows. If it doesn't help, check the wiring harness for the crank position sensor..... its back there behind the motor......

 

on the back of the cylinder head there is a heavy duty ground wire do you know where that has to be grounded i have it going to the frame but i think it actually came off the motor and went into the frame but cant find it coming out any place

 

i replaced that already

 

what is the PDC

 

i am lost i know my way around a motor but this just boggles me i have check all the relays and sensors i have put new coil,cam shaft sensor and crank shaft sensor

 

black box behind battery, and the ground wire goes from the head to the firewall.