Hemi Swap into a 2nd Generation Ram
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
I sent the 2003 ECM off my Dakota , I know for a fact theres nothing wrong with it you'll get it on Friday. If you have everything wired right , you'll be driving Saturday..I know you're about ready to scrap the project , but I can assure you , you'll be glad you didn't once you get it right and drive it..
I did a burnout wed. and almost blew my back tire . One burnout , and I could see the air in the tire..So I had two new ones put on yesterday . It's fun , but I won't be doing that again , expensive black mark ? In deed..I wish I could have video taped it..
Did you talk to the guy that flashed you're computer ? I think something's wrong with it..You were getting spark before you sent it off "Correct"? But no fuel ? Now you're getting fuel but no spark ? If the fuel pump was wired wrong , you wouldn't get fuel , IF there was something wrong with the engine wiring , you wouldn't have got spark before.. If I had to guess I would say there's something wrong with the ECM..
"IF" - for some reason The ECM I sent don't correct this problem E-Mail me and we'll figure it out ..
I did a burnout wed. and almost blew my back tire . One burnout , and I could see the air in the tire..So I had two new ones put on yesterday . It's fun , but I won't be doing that again , expensive black mark ? In deed..I wish I could have video taped it..
Did you talk to the guy that flashed you're computer ? I think something's wrong with it..You were getting spark before you sent it off "Correct"? But no fuel ? Now you're getting fuel but no spark ? If the fuel pump was wired wrong , you wouldn't get fuel , IF there was something wrong with the engine wiring , you wouldn't have got spark before.. If I had to guess I would say there's something wrong with the ECM..
"IF" - for some reason The ECM I sent don't correct this problem E-Mail me and we'll figure it out ..
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
you didn't miss slice any wires of the same color did you? check all your grounds and all your connectors. make sure they are pushed in all the way. no bent broken or corroded pins. in situations like this, always go back to the basics. people always try to over think themselves, when they are doing something out of their realm.
You got that one right..Sometimes sticking to basics is best..We'll know by Sunday if he wired it right...
thanks george good to know we think the same!!
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
Hey D !!! I am waiting with anticipation on that ECM to get to you. I can't wait for you to hook it up .I'll be checking this thread often to see what the outcome will be..
For some reason I don't think Dodge was the only thing on Rapids mind when he wrote that. hee~hee...
For some reason I don't think Dodge was the only thing on Rapids mind when he wrote that. hee~hee...
Last edited by HemiDak-Quad; Jan 6, 2012 at 11:37 AM.
