Hemi Swap into a 2nd Generation Ram
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
Send me your email address and I'll send the pin-outs you need if you use a 2003 wiring harness If you go with the 04 harness I can't help too much- I don't have a lot of info on a 04 version of this swap...
Thread Starter
|
Professional
Joined: Sep 2009
Posts: 234
Likes: 1
From: Elko Nevada
http://www.customdakotas.com/forums/...tml#post185155
really helpful thanks George I will be updating with more pics tomorrow.
really helpful thanks George I will be updating with more pics tomorrow.
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
Cool, I guess you noticed on the CustomDakotas sight I found all of the 04' Pin-outs ...It took Hours ...
Do you have the 04' Dash wire harness If not I have one I don't need..
In all of this searching and researching, I found that the only differance between the 2003 pin-out and computer and 04' pinout and computer is one plug..The green TCM plug....You can remove the TCM and run the wires from it to the Green plug on the 04'TCM..All you need is the tcm pinout for the 4.7 and the 04 Hemi pin-out..Both are on CustomDakotas.com...Match the numbers and splice them together..You're in good shape..
Is there anything that you are lacking..?
OH- Your PDCs ..Does one of those PDCs have two plugs on the inside that plug in where the breakers are ? If so which one Your truck ?or the one you got with the Motor? I think that's the one you want 2 use..I have the pin-out for each of those plugs and wires..
Man dam- I must be the slowest person alive - Hi Kyle..Duh-Your computers should be there soon..Duh which way did he go George, which way did he go...
Hey D- You get those computers yet??
Do you have the 04' Dash wire harness If not I have one I don't need..
In all of this searching and researching, I found that the only differance between the 2003 pin-out and computer and 04' pinout and computer is one plug..The green TCM plug....You can remove the TCM and run the wires from it to the Green plug on the 04'TCM..All you need is the tcm pinout for the 4.7 and the 04 Hemi pin-out..Both are on CustomDakotas.com...Match the numbers and splice them together..You're in good shape..
Is there anything that you are lacking..?
OH- Your PDCs ..Does one of those PDCs have two plugs on the inside that plug in where the breakers are ? If so which one Your truck ?or the one you got with the Motor? I think that's the one you want 2 use..I have the pin-out for each of those plugs and wires..
Man dam- I must be the slowest person alive - Hi Kyle..Duh-Your computers should be there soon..Duh which way did he go George, which way did he go...
Hey D- You get those computers yet??
Last edited by jasonw; Jun 2, 2011 at 09:48 AM. Reason: Merging double posts.
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
I posted the pin-out's you'll need .They start on page 10 of my thread and include the APPS box ..I'll be posting more each day,as I find time..If there's anything specific you need to know , let me know what it is and I'll post it..
Hows the swap coming along ? Got any pics ?
Hows the swap coming along ? Got any pics ?
Last edited by jasonw; Jun 2, 2011 at 09:48 AM. Reason: Merging double posts.
Thread Starter
|
Professional
Joined: Sep 2009
Posts: 234
Likes: 1
From: Elko Nevada
I had some time off from school I started wiring up the interior and I got the new Dash installed and wired. I'm Just waiting to install my frame mounts. Here are some pictures of the interior. I do need to find the wiring diagrams for the gen 2 power locks and windows and the gen 3 power locks and windows. It may take me awhile to get more pictures up and to make much more progress, I have 19 credit hours this semester.
Gen 3 Dash from the Driver Side
Gen 3 Dash Passenger Side
Dash install View from back seat
This was my Old setup after I pulled it.
Tcase NP230 sold for $250 Blown trans sold for $200 360 Motor sold for $450
New Dash progress
Dash all buttoned up and installed. I love how it looks.
Dash From Center
You Can see my remote oil filter I installed on the passenger side fender to keep from having to hack up my front crossmember.
Hemi PDC
Funny pic my bro inlaw took of me safely dropping the gas tank out of my donor.
Redneck truck lift.
Old frame mount been partially cut off
New Frame mount where it is going to sit.
Gen 3 Dash from the Driver Side
Gen 3 Dash Passenger Side
Dash install View from back seat
This was my Old setup after I pulled it.
Tcase NP230 sold for $250 Blown trans sold for $200 360 Motor sold for $450
New Dash progress
Dash all buttoned up and installed. I love how it looks.
Dash From Center
You Can see my remote oil filter I installed on the passenger side fender to keep from having to hack up my front crossmember.
Hemi PDC
Funny pic my bro inlaw took of me safely dropping the gas tank out of my donor.
Redneck truck lift.
Old frame mount been partially cut off
New Frame mount where it is going to sit.
Registered User
Joined: Jan 2011
Posts: 2
Likes: 0
wow wow wow
Hi there,
looks realy good.
Nice Job so far.
I decide to make nearly the same....
with an 6.1 -2008 out of a SRT Charger.
But maybe is a stroker small Block better+cheaper, and not so much trouble???!!!
Have somebody an good adress for bolt on stroker engines?
Graetings
*****
Spain
looks realy good.
Nice Job so far.
I decide to make nearly the same....
with an 6.1 -2008 out of a SRT Charger.
But maybe is a stroker small Block better+cheaper, and not so much trouble???!!!
Have somebody an good adress for bolt on stroker engines?
Graetings
*****
Spain
Keep on keepin' on, not everyone can do this. If there's any other way to drive a vehicle with pride "other than building it the way you want it", I don't know what it is..