'99 Ram 2500 Wont start
#1
'99 Ram 2500 Wont start
I have a 1999 Dodge Ram 2500 4X4 5.9 liter it was running i replacet the transmission not its not starting at all i checked the crankshaft position sensor thats is alright i replaced the Ignition coil and distributor and rotor its firing and wants to start put wont run Can i get some advice please im bazzeld thanks
#2
#3
#4
#6
#7
Trending Topics
#9
Probably an hour labor to diagnose, and then whatever (if any) to fix.
Scan tools that can do what you need are hideously expensive, measured in thousands of dollars...... I have been looking for a software package that can serve that purpose, but, details on them are sketchy at best...... Needless to say, I haven't found one yet.
Scan tools that can do what you need are hideously expensive, measured in thousands of dollars...... I have been looking for a software package that can serve that purpose, but, details on them are sketchy at best...... Needless to say, I haven't found one yet.
#10
If it was running fine before the trans replace I would put my money on the CPS. If you didn't remove it before changing the trans, there is a good chance it's damaged. How did you check it? You could also check all grounds and fuses and relays. And get a fuel pressure tester to check it properly.