2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

3.9 swap

Thread Tools
 
Search this Thread
 
  #1  
Old 11-03-2010, 05:16 PM
villaniller's Avatar
villaniller
villaniller is offline
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default 3.9 swap

How ya'll are?

I have an '01 3.9L 2wd 5spd pickup that's been to hell and back several times. I have a wrecked donor truck ('98 5.2 4wd Auto). What would I need to swap the engines? Everything in the donor truck is in decent condition, engine is unharmed and runs like a top.

Thanks for your time and much needed help.
 
  #2  
Old 11-03-2010, 05:23 PM
Gaius's Avatar
Gaius
Gaius is offline
Veteran
Join Date: Oct 2010
Location: Beaverton, OR
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm not sure of the exact changes from the 98-01 (I know there were a lot of small wiring changes from 97-98), but I would bet that you could take the whole 98 engine/harness/PCM and plug it all in to your 01.

Keep in mind there may be plug style changes and you may have to transfer over some of your 3.9 harness plugs. Also, I'm not sure if the 2001 PCM will integrate with your gauge cluster, but that's an easy swap if not. Hopefully someone can chime in with that info.

Another option is to add in the wiring needed (injectors, extend the alternator and AC wires) to your 3.9 harness and use that, but I think that would be a pain.

Also keep in mind that Federal EPA laws state that you can only use the same year or newer, so if you have emissions testing, they will see it's a 98 PCM.

I'm using a 96 drivetrain in my 98 Jeep, but the PCM is 98 so it can talk to the gauges.
 
  #3  
Old 11-03-2010, 05:24 PM
Gaius's Avatar
Gaius
Gaius is offline
Veteran
Join Date: Oct 2010
Location: Beaverton, OR
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

How bad is the 98? Can you swap over the 01 body?
 
  #4  
Old 11-03-2010, 05:29 PM
lane's Avatar
lane
lane is offline
Veteran
Join Date: Dec 2009
Location: newfoundland
Posts: 357
Likes: 0
Received 0 Likes on 0 Posts
Default

you'll need a transmission.
 
  #5  
Old 11-03-2010, 07:25 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,529
Likes: 0
Received 3,390 Likes on 3,130 Posts
Default

The PCM from the 98 won't work either, it will be expecting an auto trans at the other end of that harness, and won't find it.... that will confuse it, and you will have a perpetual CEL.

Same goes for the wiring harness. The only part out of the donor truck you can use is the engine. Nothing else is the same.
 
  #6  
Old 11-03-2010, 07:29 PM
Gaius's Avatar
Gaius
Gaius is offline
Veteran
Join Date: Oct 2010
Location: Beaverton, OR
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HeyYou
The PCM from the 98 won't work either, it will be expecting an auto trans at the other end of that harness, and won't find it.... that will confuse it, and you will have a perpetual CEL.
Correct. I was thinking he was swapping everything, including tranny.

The 3.9 harness can easily be adapted to the 5.2 if he's keeping the 5-speed, if one knows wiring and has the books.
 
  #7  
Old 11-03-2010, 11:46 PM
crazzywolfie's Avatar
crazzywolfie
crazzywolfie is offline
Legend
Join Date: Jun 2009
Location: orangeville ontario
Posts: 8,024
Received 71 Likes on 67 Posts
Default

i replaced the 3.9 in my 91 with a 5.2 and had to make a motor mount extension plate for the one side. not sure if the 01 would have the same problem but it would not surprise me if it did.
 
  #8  
Old 11-05-2010, 09:39 AM
villaniller's Avatar
villaniller
villaniller is offline
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the help.

I plan on keeping the 5spd tranny. Not a fan of automatics.
What is CEL?
And they don't do emission testing where I'm at, if they change it, I know all the people in town that do the Inspections, so I could get away with it if need be.
 
  #9  
Old 11-05-2010, 09:42 AM
villaniller's Avatar
villaniller
villaniller is offline
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Gaius
How bad is the 98? Can you swap over the 01 body?

The 01 body it pretty messed up due to the wreck. All I want is the engine.
 
  #10  
Old 11-05-2010, 09:53 AM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 17 Likes on 16 Posts
Default

CEL= Check Engine Light
 


Quick Reply: 3.9 swap



All times are GMT -4. The time now is 12:27 PM.