When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
an old trick to gain lubrication in the mains is to buy 2 sets of bearings and use the two halves that have the oiling groove. Less wear on the mains that way and they hold a bit more oil for those dry hard starts.
Relief has happened and now you're on your way. Your engine will be ready to rock soon. My son, who built my engine, did go with the 10.5 iCon forged pistons because he felt they matched the quench nicely of the R/T heads.
We did use KB hypers in a 360 drag engine and they worked well with a set of the modded up old J heads. You are going to love this engine.