2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

tranny swap on a 95 now wont run

Thread Tools
 
Search this Thread
 
  #11  
Old 12-25-2010 | 05:01 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,852
Likes: 3,444
From: Clayton MI
Default

Replace the cap too.
 
  #12  
Old 12-26-2010 | 11:02 AM
BiggyT91's Avatar
BiggyT91
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 30
Likes: 0
From: Wisconsin
Default

Already replaced the cap I did that before I realized I screwed up my cps
 
  #13  
Old 12-26-2010 | 10:12 PM
BiggyT91's Avatar
BiggyT91
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 30
Likes: 0
From: Wisconsin
Default

Get it to run threw a new rotor on it and it fired right up...but my tranny is junk there is a god awfull clicking noise comming from it when its in anything but park
 
  #14  
Old 12-26-2010 | 11:25 PM
xjarhead69's Avatar
xjarhead69
Record Breaker
Joined: Nov 2009
Posts: 1,044
Likes: 0
From: Leesburg, IN
Default

Is it possible that the e-clip on the parking sprag poped off rooster comb on the vavle body.
And when you put it in gear its not pulling the sprag from the park position.
Might be worth pulling the pan to find out.

Dave
Name:  E-clippic.jpg
Views: 25
Size:  112.0 KB
 

Last edited by xjarhead69; 12-26-2010 at 11:28 PM.



Quick Reply: tranny swap on a 95 now wont run



All times are GMT -4. The time now is 06:56 AM.