2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Back with a new interesting problem

Old Jan 19, 2011 | 08:36 AM
  #41  
matty675's Avatar
matty675
Record Breaker
Joined: Feb 2010
Posts: 1,504
Likes: 1
From: Chesapeake, VA
Default

if when you swap the OP sending unit, there is no change in its manner. you do indeed have low OP... worn internals, time for a rebuild
 
Reply
Old Jan 19, 2011 | 10:44 AM
  #42  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,377
Likes: 4,210
From: Clayton MI
Default

Originally Posted by matty675
60 psi? thats really really good! how many miles?
165,000 miles on the clock. Using 10w30 dino oil. The truck was not really well maintained by the previous owner either......

Originally Posted by TS6034
Just thought I'd jump in here. I've got a 99 2500 5.9 with 220,000 miles. Runs good and after just spending 2 grand on a new trans, it drives good too. While messing around with the snap on scanner, I realized that my warm oil pressure drops to 7psi all the time as I come up to a stop sign. Kinda freaked me out because I plow with it and have several accounts.

I assume I have worn internals and am plannin a rebuild in the summer. Just read the posts by HeyYou and wondered if I could hear more about the oil pump swap...
Oil pump swap was easy. Took me about two hours, working in my driveway..... I installed a high volume pump, simply because of the high mileage. I am very pleased with the results.
 
Reply
Old Jan 19, 2011 | 01:36 PM
  #43  
paintball31390's Avatar
paintball31390
Thread Starter
|
Registered User
Joined: Aug 2007
Posts: 26
Likes: 0
Default

alright, I will attempt the oil pump swap then, ...the truck is a 2wd not 4x4, but I can probably figure it out if I follow the Chilton guide.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:45 AM.