99 Dodge Ram 2500 Tranny
#11
#12
ya like the adjusting screw would go in but just seemed to keep going never gettin tight. i didnt know how far to keep going with it so i just put back to where it was and put all back together. like how far should it screw in. think i got 4 or 5 turns on the adjusting screw then stopped.
#13
It should tighten up before the head of the adjusting screw disappears below the surface of the lock nut..... If it doesn't, something is wrong internally. Either the anchor came out, or the band just physically broke. Only way to know for sure is to drop the pan, and have a look......
There are some resources available for what things 'should' look like....... Check the FSM, and I think there are also trans manuals linked in various places.
There are some resources available for what things 'should' look like....... Check the FSM, and I think there are also trans manuals linked in various places.
#14
#15
#16