Noise during acceleration
I'd have my a** parked at his shop door when they arrived in the morning, and ask, "can you hear me now?"
Got the truck back today and freaking night and day difference. Now my OD off light is on. The shop doesn't do transmissions but they said it looks recently rebuilt but it isn't supplying the pressure it's suppose to be? Not sure if I repeated that right but does that make sense to anyone?
Ok, 99. Yep. You have the governor pressure sensor and solenoid. They are notorious for getting gummed up, and then not working properly. You could drop the pan,and see what ya got, and if it's rather cruddy, remove them, and clean 'em, or, simply replace them.
Verify all electrical connections at the trans first though. Are you getting any codes?
Verify all electrical connections at the trans first though. Are you getting any codes?
P0751 O/D Switch Pressed (Low) More Than 5 Minutes
Thats the code i am getting. I got the tuner in this morning and updated it, so im guessing it wiped any other codes it was getting.
Thats the code i am getting. I got the tuner in this morning and updated it, so im guessing it wiped any other codes it was getting.
That would indicate that something is shorted. O/D switch is just a momentary switch that tells the PCM you don't want overdrive until the next key cycle. (or, you press the button again.) If you press the button, does anything change? If not, time to start checking wires.
Add the basic info to your profile also. It will/should show up when you post from a cell phone.







