Hypertech Max Energy Optimun Settings
#11
Ok. I am not surprised, I have not been very impressed with my Hpertech tuner so far. Gained a small amount of power and maybe 1 mpg increase. Put that against the fact Im running high test at $1.22/L and paid almost $500 for the tuner. SCT next for sure, heard too much good about it not to go that route next.
#12
Stupid me, I didn't catch it earlier, but IIRC, you mentioned yours is a Power Programmer III ? (in the post you deleted) Well, I own one that I used on my 98 and it does not do shift points on a Ram and neither does the Max E. But, that's neither here nor there.
Your problem is a loss of power. Most likely having to do with a blown plenum,bad o2, slowly clogging cat, the "death flash" and running 33" tires with 3:55 gears. Other than that, you can try changing shift points by adjusting the TV cable. First link gets you to stock location, second link is for adjustments.
https://dodgeforum.com/forum/2nd-gen...-in-trans.html
http://www.bionicdodge.com/Download/...Adjustment.pdf
And here is my PPIII
Your problem is a loss of power. Most likely having to do with a blown plenum,bad o2, slowly clogging cat, the "death flash" and running 33" tires with 3:55 gears. Other than that, you can try changing shift points by adjusting the TV cable. First link gets you to stock location, second link is for adjustments.
https://dodgeforum.com/forum/2nd-gen...-in-trans.html
http://www.bionicdodge.com/Download/...Adjustment.pdf
And here is my PPIII
#13
Mine is actually the Max Energy. The plenum may be shot, very little oil consumption if any though. O2 sensor is only a few months old as well at the cat. As far as the death flash I know very little about this or how to test for it or fix it (if possible). 33's deffinately changed how the truck drove, and 3.55's would be changed to 4.10's if I had the money! Haha
Think ill try the search button to read up on this death flash...
Think ill try the search button to read up on this death flash...
#14
My Fault (I should have been more clear in my post)
Sorry if you misunderstood my post ****I wanted to make sure you knew that there were no shift point features for your vehicle and to display the features you did have available.
#15