They say I dont have a trans temp sensor

Subscribe
Oct 7, 2011 | 01:30 PM
  #1  
Dont know if I should of put this in my other thread or not bit if so sorry,well I keep getting codes that theres to much electric@trans temp sensor&so I decided Ill just change it well I called oriley,autozone,the dealer&all said my truck which is in my sig,had no trans temp sensor is there a part number or diffrent name I can have them loom for?
Reply 0
Oct 7, 2011 | 01:42 PM
  #2  
Trans temp sensor on yours is located in the output cooler line, right by the trans. There will be an electrical connector going to it.
Reply 0
Oct 7, 2011 | 01:48 PM
  #3  
So it not in the pan?
Reply 0
Oct 7, 2011 | 01:52 PM
  #4  
Nope, go out, crawl under there, and have a look.
Reply 0
Oct 7, 2011 | 02:55 PM
  #5  
While we are on the subject, at what temp does the light kick on?
Reply 0
Oct 7, 2011 | 03:38 PM
  #6  
Above 250 or so..... don't know the exact number.... HOT.
Reply 0
Oct 7, 2011 | 05:37 PM
  #7  
Here's the TSB, and some one needs to download the manual from the FAQ/DIY section, or get a Haynes atleast.

http://dodgeram.info/tsb/1995/08-06-95.htm
Reply 0
Oct 7, 2011 | 09:17 PM
  #8  
Just came from buying the haynes&heyyou how do I eliminate that check valve&the plug to trans temp sensor was lose hope that waa the problem!
Reply 0
Oct 7, 2011 | 09:28 PM
  #9  
How to remove the check valve link.

https://dodgeforum.com/forum/2nd-gen...ve-delete.html
Reply 0
Oct 7, 2011 | 09:55 PM
  #10  
Thank you!
Reply 0
Subscribe