When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
i dont plan on going over the 2.5/1.75 lift. im just wanting a little bit more room to work with a more aggresive tire and the added bit of clearance to make vehicle maintenance easier. and i completely agree about the blocks. ive chose shackles over blocks everytime just because its a dd, plus the fact that i prefer the looks of them more.
I have the 6.5 lift on a 96 1500 2WD we recently picked up but its missing the lift spindles and thus the upper control arm/spindle connect awkwardly. Anyone have a 3.5" spindle set for sale/trade (i.e FTS3000-7DS, FTS3000-7PS)
Well if not, do you think the 2000-2001 Fabtech 3.5" spindles (i.e FTS3200-7DS, FTS3200-7PS ) will work?
I thought the front chassis was the same on the 2wds. I know the pivot arm for the upper control arms is the same from 94-04; maybe other years also.
Since I have yet to actually see a fabtech spindle for this truck; its unclear to which of the below is the correct one.
Supposedly this is the FTS3000-7
But another site says the below is the FTS3200-7, sure looks the same as the above FTS3000-7
Yet another site says the below Fabtech spindle fits 94-2001 and looks different from above.