2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Time to repair my plenum gasket?

Thread Tools
 
Search this Thread
 
  #11  
Old 06-07-2012 | 06:14 PM
Wombat Ranger's Avatar
Wombat Ranger
Grand Champion
Joined: Sep 2011
Posts: 5,672
Likes: 3
From: Wild West
Default

Originally Posted by kejobe
Elec. fans will add up to another $500. Possibly more.
Or less. Mine cost me just over $100 for the setup
 
  #12  
Old 06-07-2012 | 06:23 PM
kejobe's Avatar
kejobe
Record Breaker
Joined: Aug 2010
Posts: 2,241
Likes: 12
From: Ohio
Default

Originally Posted by 2x1972
or less. Mine cost me just over $100 for the setup
smarta$$!!
 
  #13  
Old 06-07-2012 | 07:51 PM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

Just get some from the junkyard and wire up a basic on/off switch. Just don't forget to turn it off....or on for that matter....
 
  #14  
Old 06-12-2012 | 08:56 PM
FourStop's Avatar
FourStop
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 10
Likes: 0
Default

Thank you for all the advice, I will be ordering the parts this week, changing it all out next week.
 
  #15  
Old 06-12-2012 | 10:34 PM
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 3
From: Austin, TX
Default

Originally Posted by 1999blkdakrt
Yeah get the Hughes Plenum plate with the crappy Dorman kit, do not buy this one and save money and get the superior gasket kit from your local auto parts store, hell 50 bucks or so is 50 bucks any way you cut it.
http://www.ebay.com/itm/261034033579...84.m1586.l2649

Not JUST plugging another member here, but I bought this place on e-bay BEFORE I knew he was a member.....and it was probably the best investment for the dollar that I made on my Ram. The savings over the Hughes plate almost pays for the double roller timing set.

And + "however" many on doing this right away and the valve cover gaskets, cat and O2 sensor.

The oil you save will pay for the cost of the repair. The improved performance is like icing on the cake!
 
  #16  
Old 06-12-2012 | 10:57 PM
ZeroZero3's Avatar
ZeroZero3
Professional
Joined: Feb 2012
Posts: 166
Likes: 0
From: Canada East Coast
Default

Originally Posted by gdstock
Not JUST plugging another member here, but I bought this place on e-bay BEFORE I knew he was a member.....and it was probably the best investment for the dollar that I made on my Ram. The savings over the Hughes plate almost pays for the double roller timing set.

And + "however" many on doing this right away and the valve cover gaskets, cat and O2 sensor.

The oil you save will pay for the cost of the repair. The improved performance is like icing on the cake!
Are you guys just talking about the plate or the repair kit from Hughes? with all of what's in the kit I think it's not too bad of a deal.
 
  #17  
Old 06-12-2012 | 11:02 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,786
Likes: 3,432
From: Clayton MI
Default

Price the plate/bolts from blkdak, and a gasket kit locally, then see which is the better deal.
 
  #18  
Old 06-12-2012 | 11:21 PM
ZeroZero3's Avatar
ZeroZero3
Professional
Joined: Feb 2012
Posts: 166
Likes: 0
From: Canada East Coast
Default

Originally Posted by HeyYou
Price the plate/bolts from blkdak, and a gasket kit locally, then see which is the better deal.
Well I looked for the gasket for the timming chain and it was 30$ locally, hughes have the water pump and timming chain gaskets for 10$ so after that I didn't asked about the gaskets for the plenum and the intake. Nuts and bolts are cheap anywhere. A plate plus shipping from ebay on top of expensive gasket kits and it's pretty close to what the kit cost. Maybe not for you guys down the States but for me in middle of nowhere east coast of Canada it's not a bad deal when you have to drive half an hour to get some bolts.
 
  #19  
Old 06-12-2012 | 11:28 PM
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 3
From: Austin, TX
Default

Timing set should have the gaskets for it. Intake gaskets locally most likely best price available. Bolts for plate come with plate from blkdak.

Shipping may eat the savings to Canada...but Hughes has to ship from US to Canada also.....

Go with the best deal you can get obviously, but savong money is good...especially with the cost of little things...like gas....and the quality of the plate from blkdak - fits perfect, works great.
 
  #20  
Old 06-12-2012 | 11:28 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,786
Likes: 3,432
From: Clayton MI
Default

I had to buy gaskets separately from the timing gears and such. It came with the water pump gasket..... (as did my water pump....I have a spare.)
 


Quick Reply: Time to repair my plenum gasket?



All times are GMT -4. The time now is 05:47 PM.