DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Belt squeeling

   
Old Sep 20, 2012 | 10:44 PM
Share
  #11  
Derick C.'s Avatar
Derick C.
Thread Starter
|
Professional
Joined: Apr 2011
Posts: 207
Likes: 8
From: Auburn WA
Default
Originally Posted by HeyYou
If you just replaced the pulley, might wanna replace the tensioner arm as well...
The tensioner arm still has alot of tension. When I put the motor in it got the 2 new pulleys and a new belt at the same time.
 
Reply
0
Old Sep 20, 2012 | 11:38 PM
Share
  #12  
It's Me Patt's Avatar
It's Me Patt
Captain
Joined: Jun 2012
Posts: 683
Likes: 1
From: East Coast
Default
Originally Posted by Derick C.
The tensioner arm still has alot of tension. When I put the motor in it got the 2 new pulleys and a new belt at the same time.
Might want to order one from rock auto use discount code 110502559063811
 
Reply
0
Old Sep 20, 2012 | 11:48 PM
Share
  #13  
keepitrunning's Avatar
keepitrunning
Rookie
Joined: Sep 2010
Posts: 58
Likes: 0
From: Okanagan Valley BC
Default
I removed the tensioner assy and gently pryed the bearing seals out , rinsed bearing out and re-greased with needle fitting on grease gun. Seals back in and no squeal.
 
Reply
0
Old Jul 28, 2013 | 11:38 AM
Share
  #14  
Derick C.'s Avatar
Derick C.
Thread Starter
|
Professional
Joined: Apr 2011
Posts: 207
Likes: 8
From: Auburn WA
Default
Turns out with my scat crank the balancer wont press on all the way so the belt was squealing on the lower pulley. Had to mill of 1/8" on the back of balancer.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
Loose rocker arm bolt


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 08:24 PM.