Inexpensive But Nice Black Wheels?
#1
Inexpensive But Nice Black Wheels?
I'm going to pick some 33 BFGs up today since i found them for 225 for all 4 so now i need some other 16" wheels. I'm going to mount them on stock wheels for now until i find other wheels. I found these on discounttiredirect for only 82 apeice, but is there any other nice black wheels for cheaper?
http://www.discounttiredirect.com/di...8.5&vid=011833
I would like the wheel to have some type of offset so it sits the wheel alittle bit farther out compared to stock. I'm new to the offsets of wheels and everything so i don't know what to look for. I don't want half the tire out the fender, just alittle bit to give it that nice stance.
http://www.discounttiredirect.com/di...8.5&vid=011833
I would like the wheel to have some type of offset so it sits the wheel alittle bit farther out compared to stock. I'm new to the offsets of wheels and everything so i don't know what to look for. I don't want half the tire out the fender, just alittle bit to give it that nice stance.
#2
Need to look at backspacing. Stock is like 4.5 inches, if you want them to stick out a bit further, need to take rim width into consideration as well. An 8 inch wide rim, with the same backspacing, will stick out a half inch, to an inch further. (stock wheels are 7 or 7.5 inches wide, can't recall exact number...) Smaller backspacing will move the wheel further out of the fender. (as will a wider wheel with the same backspacing.)
#3
#4
Stock BS is 5", not 4.5. HeyYou...I've caught you again on this.
http://dodgeram.org/tech/specs/wheel/specs.htm
Chilly -- check out 4WP for their buy 3 get 1 free deals to see if they fit your fancy.
http://dodgeram.org/tech/specs/wheel/specs.htm
Chilly -- check out 4WP for their buy 3 get 1 free deals to see if they fit your fancy.
#7
Trending Topics
#8
Need to look at backspacing. Stock is like 4.5 inches, if you want them to stick out a bit further, need to take rim width into consideration as well. An 8 inch wide rim, with the same backspacing, will stick out a half inch, to an inch further. (stock wheels are 7 or 7.5 inches wide, can't recall exact number...) Smaller backspacing will move the wheel further out of the fender. (as will a wider wheel with the same backspacing.)
I would paint my stock wheels, but i don't have an extra set to throw on there until they are done. I have to drive to work/school everyday. I wouldn't mind my tires out an extra 1/2"-1" if i got the Cragars, but most of them come in 15" and I'm buying the tires which are 285/75r16.
Last edited by ChillyPhil; 01-15-2013 at 12:19 PM.
#10