+1. Don't ask.....

 

that will remain as the "unspeakable".

 

I went over to Napa today to get the fittings for the delete, turns out Napa Canada and Napa US have two entirely different parts number list and different suppliers.
So, if I just take the check valve out and drill it out, will that work just as well? Any drawbacks to doing this?

 

I drilled mine out. No problems with it. Ball is plastic or rubber.

 

drilling it out is a good fix. just be sure and blow it out clean with air or brake cleaner.

edit. scooped by gd....

 

thanks all for the input - again

 

Thank you, as well.

 

I just drilled mine out too. I believe I used a 5/16" drill bit.

 

dose the 94 year have the check valve?

 

I believe so. Open the hood and look.