2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Stuck

Thread Tools
 
Search this Thread
 
  #1  
Old 07-08-2013, 12:52 AM
aromanj92's Avatar
aromanj92
aromanj92 is offline
Registered User
Thread Starter
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Stuck

so need some insight. have a 01 ram 2500 5.9 gas. stuck in park thna have to do all types of crazy stuff to get it out of park because key dont turn when its stuck so have to get it into neutral to turn key and other stuff. dont know what could be any insights?

also truck vibrates when going 70-78 mph? any idea what that could be also
 
  #2  
Old 07-08-2013, 09:12 AM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,772
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default

Could be bad ignition switch, or, troubles with the shift linkage. I would start by taking apart the covers on the steering column, and have a close look at things in there.

Vibration could be anything. Start with rotating the tires, and see if the vibration changes.
 
  #3  
Old 07-08-2013, 09:54 AM
aromanj92's Avatar
aromanj92
aromanj92 is offline
Registered User
Thread Starter
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

okay got the vibration done. put balance bags in my tires.

and ended up being the neutral safety switch which is weird. but thanks for the help
 
  #4  
Old 07-08-2013, 10:00 AM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,772
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default

Merc tried balance beads in his tires.... they gave him a vibration that was difficult to track down....
 
  #5  
Old 07-08-2013, 10:49 AM
aromanj92's Avatar
aromanj92
aromanj92 is offline
Registered User
Thread Starter
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

well they have helped my vibration so far . so see what happens with it.
 
  #6  
Old 07-08-2013, 11:09 AM
merc225hp's Avatar
merc225hp
merc225hp is offline
Champion
Join Date: Oct 2009
Location: N/A
Posts: 4,704
Received 8 Likes on 8 Posts
Default

Y yes I did. I will never use them again, thats me. For some reason mine turned into gummy beads, they would stick in clumps inside the tire and make it very unbalanced. I was "told" moisture in the tire/air caused this (not to sure I believe that). So don't use air use nitrogen with those beads.
 
  #7  
Old 07-08-2013, 11:23 AM
aromanj92's Avatar
aromanj92
aromanj92 is offline
Registered User
Thread Starter
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

well thats what we put in our trucks where i work so tried it out but ill give it a week or 2 see how they work. i never needed them with my cummins which why didnt think i would wiht my current truck.
 
  #8  
Old 07-08-2013, 11:33 AM
merc225hp's Avatar
merc225hp
merc225hp is offline
Champion
Join Date: Oct 2009
Location: N/A
Posts: 4,704
Received 8 Likes on 8 Posts
Default

They might not give you one bit of trouble, I know guys that use them and have zero problems with them. For some reason my experience with them was not good, cost me a lot of money trying to hunt that problem down.

Edit: What's the brand name of the beads you used?
 

Last edited by merc225hp; 07-08-2013 at 11:36 AM.
  #9  
Old 07-08-2013, 12:13 PM
aromanj92's Avatar
aromanj92
aromanj92 is offline
Registered User
Thread Starter
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

dyna beads
 



Quick Reply: Stuck



All times are GMT -4. The time now is 01:10 PM.