DId you adjust the cable???? Get one of these also. http://www.doghousediesel.com/catalog/i307.html

 

With no codes, I would go for the Borg Warner heavy duty governor pressure solenoid, and sensor set.

 

Which btw, can also be found on ebay for cheaper. (forgot to mention)

 

the tv cable is correct..my next move is going to be dropping tranny pan again and i will replace governor pressure solenoid and sensor..i hope this fixes my problem

 

Brand New Borg Warner Governor Pressure Solenoid & New Oem Pressure Transducer. That what i need...right? Pressure transducer is that the sensor? i just want to be sure..thanks

 

That is correct.

 

thanks for the quick response and your input

 

i will be fixing it next week sometime and will post my results

 

See if you can scare up a small torque wrench that can accurately do 72 INCH pounds, and adjust the bands while you are in there.

 

ya i have one :P..thanks....i just drove the truck and now it doesn't want to shift from first gear unless i let off gas pedal.. if i rev it under 2800 rpm it and let off gas it will shift to second, if i rev to 3000+ rpms and let off gas it will skip second and go to third haha ????