2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

o/d light comes on shortly after trans temp light comes on

Thread Tools
 
Search this Thread
 
  #31  
Old 01-07-2015 | 07:17 PM
kylekiern94's Avatar
kylekiern94
Thread Starter
|
Amateur
Joined: Jan 2015
Posts: 36
Likes: 0
Default

Michigan
 
  #32  
Old 01-07-2015 | 08:37 PM
onegoodmason's Avatar
onegoodmason
Veteran
Joined: Jun 2009
Posts: 320
Likes: 0
From: up north
Default

P1740 suggests the OD solenoid is faulty . Given you loose OD , why not start there ? Seems way more likely than the TC clutch , and when they suffer loss of OD from cold , they don't drop OD . They just won't go back in if shifted out until temp is reached . I've waited 10 mins idling to get back in OD .
 
  #33  
Old 01-07-2015 | 08:42 PM
kylekiern94's Avatar
kylekiern94
Thread Starter
|
Amateur
Joined: Jan 2015
Posts: 36
Likes: 0
Default

I have replaced that solenoid twice.
 
  #34  
Old 01-07-2015 | 09:05 PM
onegoodmason's Avatar
onegoodmason
Veteran
Joined: Jun 2009
Posts: 320
Likes: 0
From: up north
Default

To re-cap . You installed new governor pressure solenoid and switch , and this ?

http://www.cascadetransmissionparts....harness00.aspx
 
  #35  
Old 01-08-2015 | 05:46 AM
kylekiern94's Avatar
kylekiern94
Thread Starter
|
Amateur
Joined: Jan 2015
Posts: 36
Likes: 0
Default

Yes all of them at least once.
 
  #36  
Old 01-08-2015 | 01:49 PM
xjarhead69's Avatar
xjarhead69
Record Breaker
Joined: Nov 2009
Posts: 1,044
Likes: 0
From: Leesburg, IN
Default

This is real simple check cover the aux cooler get on the express way as see what it does.
It will be just like running no aux cooler.

Dave
 
  #37  
Old 01-08-2015 | 04:16 PM
kylekiern94's Avatar
kylekiern94
Thread Starter
|
Amateur
Joined: Jan 2015
Posts: 36
Likes: 0
Default

I replaced all sensors a solenoids but not the harness bolted to the top of valve body
 
  #38  
Old 01-08-2015 | 06:20 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,820
Likes: 3,435
From: Clayton MI
Default

I don't think the PCM will turn on the trans temp light if it doesn't get as warm as it thinks it should.... It WILL, however, turn on the light if the trans gets warmer than the PCM thinks it should.
 
  #39  
Old 02-12-2015 | 08:43 AM
kylekiern94's Avatar
kylekiern94
Thread Starter
|
Amateur
Joined: Jan 2015
Posts: 36
Likes: 0
Default

Well it's been awhile, but I replaced the trans pan with a deeper pan and that seemed to have fixed the problem knock on wood, I have been driving the truck a few weeks now putting a lot of highway miles on it And nothing bad hopefully this helps others in the future if you have the same problem. Thanks for all the advice!!
 
  #40  
Old 02-12-2015 | 07:55 PM
ReadRam's Avatar
ReadRam
All Star
Joined: Jul 2010
Posts: 797
Likes: 0
From: fargo, n.d
Default

Originally Posted by HeyYou
I don't think the PCM will turn on the trans temp light if it doesn't get as warm as it thinks it should.... It WILL, however, turn on the light if the trans gets warmer than the PCM thinks it should.
You are correct, the light will not come on if it the fluid gets to cold, but you will lose OD until it warms up. Found that out driving at highway speed with a bad fan clutch and temps reaching -25.
 


Quick Reply: o/d light comes on shortly after trans temp light comes on



All times are GMT -4. The time now is 04:42 PM.