Parts fell in. Where could they be?
#1
Parts fell in. Where could they be?
Doing a H&S non adjustable RR install. By the firewall behind the master cylinder is hard for an old fat dude to access on a lifted truck.
First the pedastal for the rr fell into the void then in the ensuing chaos a pushrod followed off on a slightly different passage to an angle and more horizontal trajectory.
Where do you think those things might have gone?
Can't blame the kid on this one. All my fault.
I feel like barfing now.
First the pedastal for the rr fell into the void then in the ensuing chaos a pushrod followed off on a slightly different passage to an angle and more horizontal trajectory.
Where do you think those things might have gone?
Can't blame the kid on this one. All my fault.
I feel like barfing now.
#2
oh wow...well whatever you dont start it!
time to get under there and start looking, you obviously would of found it if it hit the ground. i bet my money it fell on something on the way down...in that case its gonna take some looking with some flashlights. Theres a lot of open space for it to hit the ground, so its should narrow down the possibilities
time to get under there and start looking, you obviously would of found it if it hit the ground. i bet my money it fell on something on the way down...in that case its gonna take some looking with some flashlights. Theres a lot of open space for it to hit the ground, so its should narrow down the possibilities
#3
#5
#7
To be clear, the parts rolled/fell off the head, at the back cylinder?
If that is the case, it wouldn't go up hill and towards the keg.
If it rolled off the side, my first guess would be between the starter and the block.
If it rolled off the back, it may be caught on the bell-housing web and be leaning against the back of the block.
Time to breakout your 5 jointed arm and feel around.
If that is the case, it wouldn't go up hill and towards the keg.
If it rolled off the side, my first guess would be between the starter and the block.
If it rolled off the back, it may be caught on the bell-housing web and be leaning against the back of the block.
Time to breakout your 5 jointed arm and feel around.
Trending Topics
#8
The parts are definitely somewhere inside the engine.
There is a hole leading somewhere into the head right between the intake and exhaust but inside toward intake. That's where the little pedestal fell. Maybe I can get one of those magnet spring things in there to get it.
The kid is already pulling pieces of the top end. We are pulling the intake at least and will go from there.
There is a hole leading somewhere into the head right between the intake and exhaust but inside toward intake. That's where the little pedestal fell. Maybe I can get one of those magnet spring things in there to get it.
The kid is already pulling pieces of the top end. We are pulling the intake at least and will go from there.
#9
#10
Me and the kid were too fat fingered and uncoordinated to pull it out last night. We spent a couple hours trying. We ought to have the kegger off here in a little while. Everything should be easier to see with that out of the way. It'll be the easiest RR install ever once that thing's out of the way.