2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

94 speedometer o/d issues!

Thread Tools
 
Search this Thread
 
  #1  
Old 07-09-2016, 09:57 AM
bpdoxey's Avatar
bpdoxey
bpdoxey is offline
Amateur
Thread Starter
Join Date: Feb 2016
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default 94 speedometer o/d issues!

I have a 94 dodge 1500 4x4 5.9 v8 magnum. My speedometer is not working, no cruise control, and won't go into overdrive. I've checked to see if both speed sensors were getting correct voltage and they were. I've swapped the instrument cluster and stI'll nothing. My speedo gear in the transfer case is fine. I'm rinning out of options.
 
  #2  
Old 07-09-2016, 10:05 AM
dbbd1's Avatar
dbbd1
dbbd1 is offline
Record Breaker
Join Date: Sep 2015
Posts: 1,552
Likes: 0
Received 4 Likes on 4 Posts
Default

Do your other gauges work properly?
 
  #3  
Old 07-09-2016, 11:43 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Is the PCM getting a VSS signal? From the symptoms, I would guess "no". Any codes?
 
  #4  
Old 07-18-2016, 10:03 AM
bpdoxey's Avatar
bpdoxey
bpdoxey is offline
Amateur
Thread Starter
Join Date: Feb 2016
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

all my gauges work except speedo and odometer. I get a code 37. I have proper voltage on all 3 wires on vehicle speed sensor. I am getting good voltage to my abs speed sensor as well
 
  #5  
Old 07-18-2016, 10:15 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

I wonder if you are getting anything OUT of the VSS...... got a scanner that can read data? 37 is a TCC code....... (unless you have a trans temp sensor....)
 
  #6  
Old 07-19-2016, 05:59 AM
bpdoxey's Avatar
bpdoxey
bpdoxey is offline
Amateur
Thread Starter
Join Date: Feb 2016
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HeyYou
I wonder if you are getting anything OUT of the VSS...... got a scanner that can read data? 37 is a TCC code....... (unless you have a trans temp sensor....)
I am getting voltage in and out of vss. I do have a transmission pressure solinoid
 
  #7  
Old 07-19-2016, 09:15 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Need to solve the speedo problem first. The PCM will never activate overdrive, if it doesn't know how fast you are going.
 
  #8  
Old 07-19-2016, 10:33 PM
frankie_b_jr's Avatar
frankie_b_jr
frankie_b_jr is offline
Captain
Join Date: Sep 2013
Location: Nevada
Posts: 584
Received 17 Likes on 17 Posts
Default

Originally Posted by HeyYou
Need to solve the speedo problem first. The PCM will never activate overdrive, if it doesn't know how fast you are going.
Sorry for the quick hijack.
What years do this? Just asking because my 97 never gave me trans problems without a speedo.
 
  #9  
Old 07-19-2016, 10:45 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Originally Posted by frankie_b_jr
Sorry for the quick hijack.
What years do this? Just asking because my 97 never gave me trans problems without a speedo.
Depends on where the problem was. If the PCM was still getting VSS signal, then it wouldn't care if the speedo itself didn't work.
 
  #10  
Old 07-19-2016, 11:06 PM
frankie_b_jr's Avatar
frankie_b_jr
frankie_b_jr is offline
Captain
Join Date: Sep 2013
Location: Nevada
Posts: 584
Received 17 Likes on 17 Posts
Default

Originally Posted by HeyYou
Depends on where the problem was. If the PCM was still getting VSS signal, then it wouldn't care if the speedo itself didn't work.
Unplugged, shorted out (max bounce speedo), and gear removed were all the same for me. Did get a mil when it was unplugged, but still shifted fine. Maybe I just had an oddity.
 


Quick Reply: 94 speedometer o/d issues!



All times are GMT -4. The time now is 11:22 PM.