replaced crank sensor now motor knocks
#1
replaced crank sensor now motor knocks
I have a 2001 dodge ram that quits when it warms up. I replaced the crank sensor started it up now the motor is knocking and get code p1391. this is not good because I just purchased the hughs plenum gasket but now I am scared to install it with the knock. the motor now seems to be flooding out idling up and down and sounded like its sucking air. I have read posts for hours on here im stumped thanks
#2
#4
#5
Same issue
It idles rough almost no power stalls out I replaced both cps and cks, plugs wires cap and rotor timing chain and gears but still runs rough and idles horrible I can hear the sucking threw the intake so i used carb cleaner on it, still runs bad and throws crank shaft positioning sensor and loss of cam shaft codes, and now it's got a electrical charging system low output code but still output is 12 v what am I missing here
#6
#7
just an update, I did replace both the crank and cam sensors distributer plugs wires etc. truck worked awesome for a week then took a bad one like it jumped its timing or something. its showing code p0340. any ideas? should I buy another sensor? I believe they are a brand called standard thanks
Trending Topics
#9