When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Well got the outer axle and intermediate axle pulled along with the wheel bearing. Now I have to think of a redneck way to drive the seal out and seat it back in. I'm honestly thinking of using beer cans to drive it out, still have to think of the way to seat it back in. Looking at the last pic on the outer axle there is something that looks broke. Anyone know what it is and if it's needed? It's right where the nipple from the intermediate shaft goes into the outer axle
shaft. The 2nd pic you can see some gunk that came out just by dragging the intermediate shaft out. Don't mind the LED light I took from work thing I'd bright as heck
Looks like some galling on the end of the axle there..... That 'shouldn't' be a load-bearing surface though......
I don't think it will hurt anything but wanted to be sure! Now if only they sold the dust caps that go on the end of the outer axle to keep the dirt out 😂