When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Yeah I welded it together, got the break from work, dug a hole and tapped into my well to pump the water in and added a filtration system so the water could be reused. I did it years ago I could fight a whole truck in and have about 8 more fet above it. It's has an electric cover that you can park on do no one falls in at night. Mostly out the cover on for when I have parties and get drunk so I don't fall in
Well got new rubbers to get rid of the ugly bald factory tires. Got it aligned thanks to my buddy but may need to tweak it some more. Thanks for the help RamMan! They are 37s Nitto all Terrian they are used and should last me until next summer, but they were free!! First pic is the old tires I had to use because the 35s went bald being out of aligned and even these ones were bald. Second pic is the new (to me) tires an the last pic is of my cab mount, I need 4 of them plus inner and outer rockers on both sides.
There is a thread around here somewhere, that the member built his own cab mounts, as they seem to be rather hard to find replacements for them. May wanna check that out.
There is a thread around here somewhere, that the member built his own cab mounts, as they seem to be rather hard to find replacements for them. May wanna check that out.
I will search the thread but you can get two for $75 on eBay. eBay carries more body parts then actually body shops. I run a business and called some of the companies I work with to try to get them at cost (which would have been about $20 a mount) but they didn't even list them. One minute search on eBay and I found them. I can get the rocker set on eBay for $120 as the same companies I called don't make the inner rockers.
There is a thread around here somewhere, that the member built his own cab mounts, as they seem to be rather hard to find replacements for them. May wanna check that out.
