No heat!!!!
Record Breaker
Joined: Jun 2011
Posts: 2,387
Likes: 41
From: Bismarck, ND
Yeah, I need to address this too. My heater is extremely anemic........ barely blows hit on the middle fan speed. I am sure it's just an air pocket in the core, but, with the v-10, getting to the hoses back there is problematic, at best...... May have to get creative.
I am going to try cutting the hose close to the outlet of the heater core, install a flush T, and use that to bleed the air out of the core. I am 'hoping' that will solve the issue.
I am going to try cutting the hose close to the outlet of the heater core, install a flush T, and use that to bleed the air out of the core. I am 'hoping' that will solve the issue.
This is the good style (notice the seal on the cylinder that moves, the cheap ones don't have that and coolant flows out there):
Administrator
Joined: Apr 2010
Posts: 87,437
Likes: 4,218
From: Clayton MI
I had this issue as well, you need to make sure you have a higher quality thermostat in it and a good cap. Otherwise some coolant is allowed to by pass the core all the time.\\
This is the good style (notice the seal on the cylinder that moves, the cheap ones don't have that and coolant flows out there):
This is the good style (notice the seal on the cylinder that moves, the cheap ones don't have that and coolant flows out there):
