95 ram 1500 4x4 5.2 just died now no start
03-03-2019, 09:16 PM
Join Date: Dec 2018
Location: New Hampshire
Posts: 42
Received 0 Likes
on
0 Posts
It does it's on the back of the engine in in between engine and transmission bell housing this 95 has it and my 98 had it
03-04-2019, 09:18 AM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,549
Likes: 0
All the magnum engines have the crank sensor.
03-04-2019, 11:24 AM
Join Date: Sep 2012
Location: Europe
Posts: 737
Quote:
Originally Posted by
HeyYou
My bad. Too used to GM trucks..... It's actually under the hood, next to the PCM.......
I always thought that this here is the OBD1 connector:
But now that you said that it would be close to the PCM, I found use for the connector I've been wondering what's the the purpose of it is:
03-04-2019, 02:56 PM
Join Date: Feb 2019
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
my 96 has the 16 pin obd2 connector under the dash and it also has that connector my the pcm
03-04-2019, 03:17 PM
Join Date: Nov 2014
Posts: 8,035
Quote:
Originally Posted by
HeikIlm
I always thought that this here is the OBD1 connector:
But now that you said that it would be close to the PCM, I found use for the connector I've been wondering what's the the purpose of it is:
that can't be the connector (the one under the hood) because my 97 & 01 have that connector (going off memory it may be different)
03-04-2019, 03:36 PM
Join Date: Dec 2018
Location: New Hampshire
Posts: 42
Received 0 Likes
on
0 Posts
At this point it runs good starts right up has no lack of power no sloping or anything so I think I can call it fixed
03-04-2019, 04:37 PM
Join Date: Sep 2012
Location: Europe
Posts: 737
Quote:
Originally Posted by
MoparFanatic21
that can't be the connector (the one under the hood) because my 97 & 01 have that connector (going off memory it may be different)
I think it is:
http://www.obd2plugs.com/Product-417.html
03-04-2019, 04:40 PM
Join Date: Nov 2014
Posts: 8,035
Quote:
Originally Posted by
HeikIlm
You could be right. I'm going off memory lol mine might be for front abs
03-04-2019, 09:18 AM
