Transmission upgrades
#21
That was thoroughly confusing.... First he says one of his canned tunes should be close enough, but then he says he doesn't want to sell you one??? What's up with that?
Another thing that has me curious, is why is he concerned up building power in the upper RPM range? Does he understand this is a TRUCK motor?? Top end power isn't exactly high on the priority list here..... Unless you are building a mud truck, and the cam installed most certainly does NOT indicate that.....
From the parts installed, it's a motor designed to develop power not much above idle. Putting an air-gap on that would defeat the purpose of the cam. Counter-productive.
Talk to Hemifever. See what he has to say.
Another thing that has me curious, is why is he concerned up building power in the upper RPM range? Does he understand this is a TRUCK motor?? Top end power isn't exactly high on the priority list here..... Unless you are building a mud truck, and the cam installed most certainly does NOT indicate that.....
From the parts installed, it's a motor designed to develop power not much above idle. Putting an air-gap on that would defeat the purpose of the cam. Counter-productive.
Talk to Hemifever. See what he has to say.
#22
That was thoroughly confusing.... First he says one of his canned tunes should be close enough, but then he says he doesn't want to sell you one??? What's up with that?
Another thing that has me curious, is why is he concerned up building power in the upper RPM range? Does he understand this is a TRUCK motor?? Top end power isn't exactly high on the priority list here..... Unless you are building a mud truck, and the cam installed most certainly does NOT indicate that.....
From the parts installed, it's a motor designed to develop power not much above idle. Putting an air-gap on that would defeat the purpose of the cam. Counter-productive.
Talk to Hemifever. See what he has to say.
Another thing that has me curious, is why is he concerned up building power in the upper RPM range? Does he understand this is a TRUCK motor?? Top end power isn't exactly high on the priority list here..... Unless you are building a mud truck, and the cam installed most certainly does NOT indicate that.....
From the parts installed, it's a motor designed to develop power not much above idle. Putting an air-gap on that would defeat the purpose of the cam. Counter-productive.
Talk to Hemifever. See what he has to say.
Yah I was pretty confused to like I thought this dude was a big shot. Pretty annoying couldn't help me out.
Which is best way to contact hemifever
#23