no clicking

 

Verify you have power TO the pcm. I think there are a couple fuses for it, both in the PDC, and in the Fuse block on the side of the dash.

 

ok so I checked fuses all good there is power going to the Engine Inline plug I was trying to find power wire for pcm but the link for my service manual is not working

 

Clicking on the link for the manual, should open a new tab with a direct download of the PDF file. (it will open in that tab.) Give it a bit, it *should* work. (works for me....)

 

I would also check all engine, body and frame grounds.

 

So turns out I didn't do a good enough inspection. My ground coming from the battery had come on contract with the exhaust manifold so thanks to everyone y'all are awesome

 

no spark fuel pumps sounds come on almost starts NO SPARK WHAT 2 DO? TY

 

Cindy, you really need to give us more info than that. What are you driving? What troubleshooting have you done? Are you even posting in the right section? If you are working on a Neon, you need to post in the Neon section, posting in the Truck section isn't going to get you any help, as we don't know squat about Neons.

 

Hello, I am having the same issues. However, at the end the truck doesn't show the "no bus". Would you know anything about that?

Thanks

 

Start a new thread, tell us what you are driving, year, engine, etc, and what the actual problem is.