2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

crank no start

Thread Tools
 
Search this Thread
 
  #11  
Old 05-01-2024 | 12:30 AM
DJGreco's Avatar
DJGreco
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 19
Likes: 0
Default

Originally Posted by Moparite
Is the fuel pump priming when you turn the key to on? Is the asd relay working?
My add relay works i checked it with the ohm reader. I do not audibly hear my fuel pump priming thought but it i don't get spark either so i figured it's tired into eachother.
 
  #12  
Old 05-01-2024 | 03:41 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,821
Likes: 3,435
From: Clayton MI
Default

Do you see power at the coil, or injectors at initial key on? (you will only get it for a few seconds, so, two people pretty much required.
 
  #13  
Old 05-04-2024 | 12:31 PM
oddone's Avatar
oddone
Amateur
Joined: Aug 2023
Posts: 28
Likes: 0
Default

I had the same issue with my 95 1500 ended up being the pick up under the distributor cap though it was crank sensor and couldn't get anyone to figure it out till a friend's mechanic came out and figured out exactly what it was
 
  #14  
Old 05-04-2024 | 04:02 PM
Moparite's Avatar
Moparite
Grand Champion
Joined: Feb 2015
Posts: 6,477
Likes: 403
Default

The asd relay needs to supply power or nothing else will work. If you have power then look at the sensors,coil ect.
 
  #15  
Old 05-14-2024 | 11:49 PM
DJGreco's Avatar
DJGreco
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 19
Likes: 0
Default

Originally Posted by HeyYou
Do you see power at the coil, or injectors at initial key on? (you will only get it for a few seconds, so, two people pretty much required.
Yes there is power to my coil i checked today
 
  #16  
Old 05-14-2024 | 11:50 PM
DJGreco's Avatar
DJGreco
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 19
Likes: 0
Default

Originally Posted by oddone
I had the same issue with my 95 1500 ended up being the pick up under the distributor cap though it was crank sensor and couldn't get anyone to figure it out till a friend's mechanic came out and figured out exactly what it was
so what needed replaced?
 
  #17  
Old 05-14-2024 | 11:52 PM
DJGreco's Avatar
DJGreco
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 19
Likes: 0
Default

Originally Posted by Moparite
The asd relay needs to supply power or nothing else will work. If you have power then look at the sensors,coil ect.
so when i checked my asd it was getting power and also i checked my fuel pump it is priming
 
  #18  
Old 05-15-2024 | 07:52 AM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,821
Likes: 3,435
From: Clayton MI
Default

Is it still throwing the same codes?
 
  #19  
Old 05-19-2024 | 11:58 PM
DJGreco's Avatar
DJGreco
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 19
Likes: 0
Default

Originally Posted by HeyYou
Do you see power at the coil, or injectors at initial key on? (you will only get it for a few seconds, so, two people pretty much required.
I checked my injectors and they are not getting power.
 
  #20  
Old 05-20-2024 | 06:29 AM
Moparite's Avatar
Moparite
Grand Champion
Joined: Feb 2015
Posts: 6,477
Likes: 403
Default

Coil, injectors and 02's get power from the asd relay. Are you sure you checked the correct wires since you said it has power at the coil?
 


Quick Reply: crank no start



All times are GMT -4. The time now is 01:25 AM.