Yes same 5 codes

 

I have power to the connector at the bottom of the coil but not the spark plug wire from the coil. Yes i checked the asd relay and where it plugs into it's getting power

 

If the coil has power, the injectors should as well. Again, only for a few seconds at initial key on, and then only if the PCM sees the engine turning. (crank sensor.) If the injectors don't have power, there is a broken splice somewhere. Service manual will show you where they are all.

 

Alright now my injectors are working

 

Do they still have power while cranking?

 

Neither my coil or injectors

 

Bad cam or crank sensor, or bad PCM.

 

So i checked my crank position sensor then checked the voltage to it and it wasnt reading anything when do i get power to it at initial key on or only when it's cranking?
Also would any of these just stop working after a day on not driving it?

 

also i replaced my crank sensor

 

Nevermind the crank sensor is getting 6.6v at initial key on and crank