i have replace the distributor cap with the rotor and ignition pickup and crank sensor and ignition coil and ignition switch still a crank no start i checked the pcm even swapped it still no start and im getting 5.2 volts to all my 5 volts points on pcm pin outs been down for two weeks need help asap

 

What is the truck info? Any codes? Getting fuel and spark?

 

no codes

 

What are you driving? Engine? Trans? Etc..... Help us help you.

 

1997 dodge 1500 sport 5.9 stock trans everything is stock

 

When you turn the key on prior to starting the truck, do you hear the fuel pump engage for a few seconds before turning off? Also, have you checked for fuel pressure at the fuel rail?

 

the aso relay is clicking on and off i tried starting fluid but is has no spark so it wouldn’t help

 

You mean ASD relay, Have you tried swapping it out with the horn relay? Battery and connections good?

 

97 won't have the pressure test port on the fuel rail, they were plastic that year......

If the fuel pump tests when you turn the key to on, but, you aren't getting any spark, likely bad crank sensor, or PCM.

 

alright so what brank crank sensor is everyone getting i tried different ones already