2001 Dodge Ram Snorkel?
#21
#22
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
there is a mud racing pit up the road for me and a lot of those guys run a cai-like pipe straight through the firewall into the cab with a k&n on the end of it.
http://www.ncmudracing.com/maphotel.htm
that place is great too, bring a grill a cooler full of beer and sit back and watch those guys run all day long.
a friend of mine used to have a blazer that he did that do and he was out wheeling with a bunch of big trucks, trying to keep up. he had some redneck nitrous too, his passenger was sitting behind the end of his intake pipe and he gave him q's on when to spray ether into the pipe. thats about as redneck as it gets right there.
http://www.ncmudracing.com/maphotel.htm
that place is great too, bring a grill a cooler full of beer and sit back and watch those guys run all day long.
a friend of mine used to have a blazer that he did that do and he was out wheeling with a bunch of big trucks, trying to keep up. he had some redneck nitrous too, his passenger was sitting behind the end of his intake pipe and he gave him q's on when to spray ether into the pipe. thats about as redneck as it gets right there.
#24
#26
#27
You would have to plug the current vent, and then install another somewhere else..... Where to put the new one is the big question...... I don't have an answer for that. Might have a chat with a local trans shop, or give PATC a call, and see what they have to say.
If you could put a vent hole on top of the trans somewhere, and seal a tube to it, you could run a vent hose anywhere you like, to keep it up out of the water.....
GM made it easy, they already have the little vent tube on the top of the trans, just push a line onto it, and route it where you want it...... Wish dodge would have done the same....
If you could put a vent hole on top of the trans somewhere, and seal a tube to it, you could run a vent hose anywhere you like, to keep it up out of the water.....
GM made it easy, they already have the little vent tube on the top of the trans, just push a line onto it, and route it where you want it...... Wish dodge would have done the same....