K&N FIPK No More
#221
#222
RE: K&N FIPK No More
ORIGINAL: hilliad
Thanks Zique. So you can use a straight bolt with the offset center you ordered? Not sure about my fabrication skills in making a S bolt.
Thanks Zique. So you can use a straight bolt with the offset center you ordered? Not sure about my fabrication skills in making a S bolt.
The stand alone breather, I couldn't tell you for sure either other than I know it is bigger than the 3/4 inch ones that are most common. I just used an APC style that has a hose clamp and clamped it on the plastic elbow of the current breather set-up.
#223
RE: K&N FIPK No More
For the guy looking for the breather filter......
Go to: https://dodgeforum.com/m_386820/tm.htm Scroll down to post #16 - I have a pic and part# on it for you.
I intend to go with the round air cleaner also - just haven't gotten time to do it yet.....
Go to: https://dodgeforum.com/m_386820/tm.htm Scroll down to post #16 - I have a pic and part# on it for you.
I intend to go with the round air cleaner also - just haven't gotten time to do it yet.....
#224
#225
RE: K&N FIPK No More
ORIGINAL: zique
That is correct. it lines right up. The kit comes w/ an S bolt, so you'll need to go to the local hardware store and pick up a 1/4"-20 bolt/rod.
The stand alone breather, I couldn't tell you for sure either other than I know it is bigger than the 3/4 inch ones that are most common. I just used an APC style that has a hose clamp and clamped it on the plastic elbow of the current breather set-up.
ORIGINAL: hilliad
Thanks Zique. So you can use a straight bolt with the offset center you ordered? Not sure about my fabrication skills in making a S bolt.
Thanks Zique. So you can use a straight bolt with the offset center you ordered? Not sure about my fabrication skills in making a S bolt.
The stand alone breather, I couldn't tell you for sure either other than I know it is bigger than the 3/4 inch ones that are most common. I just used an APC style that has a hose clamp and clamped it on the plastic elbow of the current breather set-up.
#226
RE: K&N FIPK No More
Ok, I ordered mine yesterday from Summit for about $28. Arriving on Friday this week. Bought a 1/4"-20 threaded rod to make the offset bolt. Last night I took off the plastic breather on the valve cover to see what size breather to buy and the darn thing broke into pieces. Had to literally pry it out with a screwdriver hoping none of would end up inside the vavle cover. By the way it takes a 1 1/8".
So what is the exact size of the offset? 3/4" or 7/8"
So what is the exact size of the offset? 3/4" or 7/8"
#227
RE: K&N FIPK No More
ORIGINAL: hilliad
So what is the exact size of the offset? 3/4" or 7/8"
So what is the exact size of the offset? 3/4" or 7/8"
#228
RE: K&N FIPK No More
I installed this one http://store.summitracing.com/partde...p;autoview=sku
1" offset on the bolt IIRC
1" offset on the bolt IIRC
#229
#230