LEDS for interior
#2
RE: LEDS for interior
ORIGINAL: BAdassR/T
anyone do LEDS in the map lights and if u did how did u get them out and what site did you find them on?
anyone do LEDS in the map lights and if u did how did u get them out and what site did you find them on?
LEDsandDecals013.jpg
These right?
#5
RE: LEDS for interior
05 dakotas, the front are 194, flank bulbs preferrably. The rear is the 42mm.... http://frickinbrite.com/catalog/prod...roducts_id=344<---- that's what you want for the rear if you want white, theyhave blue as well.
For 06 dakotas and up, I believe they use the 33mm festoon LEDs on vleds.com. You might want to check ur front dome lights to make sure what bulbs they are. If it goes into a socket, it's 194, if it has a bracket on both sides of the light, then it's festoon.
For 06 dakotas and up, I believe they use the 33mm festoon LEDs on vleds.com. You might want to check ur front dome lights to make sure what bulbs they are. If it goes into a socket, it's 194, if it has a bracket on both sides of the light, then it's festoon.
#6
RE: LEDS for interior
Oh a note on the festoon bulb for the dome light, you may need to bend the metal clips closer together for it to fit snugly, if you don't it might flicker or just not work (happened to me till I squeezed them together).
Oh, jimbo, one of my reading lights flickers a lot, almost positive it's just loose, any ideas to get it to fit tighter in the socket?
Oh, jimbo, one of my reading lights flickers a lot, almost positive it's just loose, any ideas to get it to fit tighter in the socket?
#7
Trending Topics
#8
RE: LEDS for interior
ORIGINAL: jimboscomp
push it in harder maybe...if not...try taking a SMALL flat head screw driver and pressing the contacts of the socket inward to create a tighter fit for the light.
push it in harder maybe...if not...try taking a SMALL flat head screw driver and pressing the contacts of the socket inward to create a tighter fit for the light.