3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

5 inch lift - 35 in Tires ???

Thread Tools
 
Search this Thread
 
  #1  
Old 12-21-2008, 06:26 PM
rking92y's Avatar
rking92y
rking92y is offline
Registered User
Thread Starter
Join Date: Nov 2008
Location: Fort Lee, VA
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default 5 inch lift - 35 in Tires ???

I found this when I was about to order the 3 inch body lift. I know it is just the 3 in Body lift lift with the leveling kit, But will this be enough for 35 in Tires????, I really do not think so
Does anyone have this yet????????

https://www.shopatron.com/product/pa...06.2.0.0.0.0.0

If it does, it will not use stock rims (16 inch)

Rich
 
  #2  
Old 12-21-2008, 06:37 PM
rking92y's Avatar
rking92y
rking92y is offline
Registered User
Thread Starter
Join Date: Nov 2008
Location: Fort Lee, VA
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default 35 in Tire Advertisement

http://www.performanceaccessories.co...smallflyer.jpg

Incase your wondering why I mention 35 in tires.
 
  #3  
Old 12-21-2008, 06:47 PM
superdak05's Avatar
superdak05
superdak05 is offline
Champion
Join Date: Mar 2006
Location: ct.
Posts: 4,741
Likes: 0
Received 8 Likes on 8 Posts
Default

depending on your gear ratio, go ahead and do it. coondog05 has something similar to that set up. drop him an email or check out his truck in his gallery
 
  #4  
Old 12-21-2008, 07:10 PM
SilverGhost1's Avatar
SilverGhost1
SilverGhost1 is offline
All Star
Join Date: Feb 2008
Location: San Diego, CA
Posts: 851
Likes: 0
Received 0 Likes on 0 Posts
Default

I was going to say the same thing. coondog5 is the source for such a lift.
 
  #5  
Old 12-22-2008, 10:13 AM
coondog05's Avatar
coondog05
coondog05 is offline
Veteran
Join Date: Feb 2007
Location: stafford springs CT
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
Default

the answer is no! with leveling kit and 3"body lift you can get 285/75/rim size.... hair under 33,s.... depending on rim backspacing of rims, might even rub at full lock. when i did mine i had 1/2 wheel spacers and i had to lose them cause my m/ts rubbed at full crank. whatever back spacing stock rims are would be fine! hope this helps... plenty beefy looking with 33,s no need to get crazy with larger unless you like fabricating.....have fun
 
  #6  
Old 12-22-2008, 10:18 AM
coondog05's Avatar
coondog05
coondog05 is offline
Veteran
Join Date: Feb 2007
Location: stafford springs CT
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
Default

take a look! ask anything you need to know too!
 

Last edited by coondog05; 12-22-2008 at 02:00 PM.
  #7  
Old 12-22-2008, 10:41 AM
Cuban11182's Avatar
Cuban11182
Cuban11182 is offline
All Star
Join Date: Apr 2007
Location: Florida
Posts: 997
Likes: 0
Received 0 Likes on 0 Posts
Default

Coondog, do you have a hitch in the back? Does it look goofy hanging down so low? Do you have any pics or can you take some? Thanks
 
  #8  
Old 12-22-2008, 01:06 PM
rking92y's Avatar
rking92y
rking92y is offline
Registered User
Thread Starter
Join Date: Nov 2008
Location: Fort Lee, VA
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Customer Service

I talked to customer service and the kit is the 3 inch body lift and the 2 in leveling kit with gap guards for the body lift.

That being said, I do not think it will cover 35's either. The max size that I was contimplating was LT 255/85R16 with stock Rims. They are 33-1/2 in tall but are only 255 wide to help with rubbing.

I like the setup that coondog has. I have an 07 4X4 with the off road package and the Tow package. The Class 4 Hitch will sit 3 inches low with the body kit and the tow hooks on the fron will not go through the slots for them so I will probrably ditch those.

Coondog, Did U use Blocks for the Rear. Can U e-mail me some details. I am ready to get it ready, Since it is the tow package it has 245 tires with 3.73 gears. And they look very small since it also has the 4X4 Offroad package.


Thanks
 

Last edited by rking92y; 12-22-2008 at 01:09 PM.
  #9  
Old 12-22-2008, 02:01 PM
coondog05's Avatar
coondog05
coondog05 is offline
Veteran
Join Date: Feb 2007
Location: stafford springs CT
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
Default

yes i have a hitch... i also put 2" blocks in the rear. no need for rear blocks but i did them cause i like the rake look personally... 1"inch would look nice if you like the level look. i like the wide tires and stance with the rake and im not sure if that size tire you describe will look "wagon wheel" ish being so thin! it should help on the rubbing but anything over 33" will be way tight! expecially if you plan on "working" the suspension and turning. when my mudders were new they would rub if i was fully cranked and used the suspension...expecially in reverse... and they were under 33". tow hooks gotta go! hitch dont look bad in my opinion... fairly easy install...did it with no help in a day... only big pain was the steering extension and cutting the radiator supports on one side! go for it!
 

Last edited by coondog05; 02-01-2009 at 11:13 PM.
  #10  
Old 12-23-2008, 10:20 AM
fireman2828's Avatar
fireman2828
fireman2828 is offline
Professional
Join Date: Jul 2008
Location: Lafayette IN
Posts: 175
Likes: 0
Received 1 Like on 1 Post
Default

Anyone want to sell the front tow hooks? Mine doesn't have them. Unless I decide to lift mine too. Does the steering extension come with the kit?
 


Quick Reply: 5 inch lift - 35 in Tires ???



All times are GMT -4. The time now is 09:03 AM.