2010 V8, Let the mods begin!
Thread Starter
|
Professional
Joined: Apr 2011
Posts: 109
Likes: 0
From: Central Ohio
2010 V8, Let the mods begin!
Just a little something....less:
DSC_2112.jpg
Haven't decided how far to go...
A little dirty, it's been raining (a lot!):
DSC_2113.jpg
A nice gift to me, from me, via Jegs (which is a few miles from my house):
DSC_2107.jpg
Before:
DSC_2108.jpg
After:
DSC_2110.jpg
Install took about an hour an ten minutes, opening box to cleaning up. Under high vacuum it sounds very normal. Under low vacuum...
Good Grief! Shut the front door!
The plan is for another mod tomorrow. Stay tuned (no pun intended).
DSC_2112.jpg
Haven't decided how far to go...
A little dirty, it's been raining (a lot!):
DSC_2113.jpg
A nice gift to me, from me, via Jegs (which is a few miles from my house):
DSC_2107.jpg
Before:
DSC_2108.jpg
After:
DSC_2110.jpg
Install took about an hour an ten minutes, opening box to cleaning up. Under high vacuum it sounds very normal. Under low vacuum...
Good Grief! Shut the front door!
The plan is for another mod tomorrow. Stay tuned (no pun intended).
Thread Starter
|
Professional
Joined: Apr 2011
Posts: 109
Likes: 0
From: Central Ohio
Nope, on the 91 octane tune already. The SC Flashpaq was actually the first mod, but since it requires no real work, I didn't count it.
No whistle. There was some resonance, but a little more seperation between the tube and filter cured that. Hopefully I'll have a video clip tomorrow, then you can listen.
No whistle. There was some resonance, but a little more seperation between the tube and filter cured that. Hopefully I'll have a video clip tomorrow, then you can listen.
Last edited by TomZ; Apr 21, 2011 at 09:24 PM.
Champion
Joined: Oct 2006
Posts: 2,662
Likes: 0
From:
